Sunday 14 February, 2021
Installed the DAA PSP brush on my RL1100 and it made a great machine better, spills are gone and machine stays a lot cleaner. Get one and try it, you won't be disappointed.
Bernard W***e
Saturday 06 February, 2021
Nice little addition to my Dillon 750XL. I reload 9mm and it works very well, stabilizing the cases during indexing. No trim or modifications required on my case, it just works
Fabio N***s
Tuesday 24 November, 2020
Like others, I had to give this brush a shave to keep it from tilting the cases so much that they sometimes would catch in the die. Other than that, it does help to minimize case shake.
What was also a big help for me was to trim a bit off of the spring that applies pressure to the indent ball under the shellplate of my Dillon 1100 press. That made the shellplate stop at each station with just a bit less whomp. Between that trick and this brush, I don't have nearly the messy press I used to.
Check uTube for the spring trimming video. . . you should probably have a spare spring on hand in case you get too enthusiastic :).
Paul A***n
Monday 23 November, 2020
Haven’t had a chance to use it yet still waiting for press to come in
Joe P***i
Wednesday 16 September, 2020
Due to the brush and its location it will slowdown the filled shell and not tilt the bullet, this helps in faster reloading and less failures. A well spend investment.
Jan-Willem D***n
Sunday 19 July, 2020
It works. However the plastic pin keeps breaking I'm on my second and probably the last one.
Fernando E M***a
Sunday 31 May, 2020
Gekocht na het lezen van de reviews hier maar ik kan niet geloven dat iedereen zo positief is na zelf deze DAA PSP Brush gebruikt te hebben.
Na 500 9mm patronen op een XL650 was de borstel al helemaal uitgelubberd en alle haren aan de voorkant staan omhoog wat tot gevolg heeft dat het niet doet wat het hoort te doen namelijk onregelmatige kruitladingen cq verspilling tegen te gaan.
Een ander probleem is dat de complete borstel ook steeds omhoog kruipt het blijft gewoon niet op zijn plek zetten je moet het telkens naar beneden duwen.
Ik kan deze DAA PSP Brush niet echt aanbevelen het is weggegooid geld en hoort ook niet thuis op deze prima webwinkel.
DAA: sorry to read of your poor experience. that is odd as most are very happy with the product. We will contact you privately to work something out.
Mario van der V***n
Friday 29 May, 2020
I'm very pleased with the brush. I am using it for 9mm reloading and it stabilizes the casings as they index to the next station. I trimmed the length just a bit to prevent the bristles from going into the powder die. Not a big deal and probably not really necessary, it just seemed better to me with the bristles shortened. Good product, just like everything DAA sells and I would recommend it to anyone with a 650.
Jamie K***r
Saturday 23 May, 2020
Useful little upgrade! Bought it on the recommendation of researching reloaders on You Tube.
Aaron M***e
Wednesday 06 May, 2020
Seems to stop the shake of the cases as they move from the powder position. A very good addition.
Robert M***r
Sunday 08 March, 2020
SImple idea that solves the index snap of the XL650. Works like a champ!
Phil Z***k
Sunday 16 February, 2020
It's not working well. With 9x19 minor, i have some powder loose. So with a major Caliber it cannot be better.
John F***é
Friday 18 October, 2019
I had to trim mine back some but it works great! I must have trimmed it just right because if a 38 round gets through when I'm loading 9 mm it will turn the case over. Sure the powder spills but I don't get a 38 round in with my 9mm.
mike g***n
Thursday 10 October, 2019
little magic piece, wish I would have gotten this earlier. Works great with my 9x19, 40S&W and the .223
especially the 9x19m and .223 where the case is allmost full the spills went more or less to zero.
But I use two of them, one between station 4 and 5, the other between station 5 and 6
Chris J***n
Monday 16 September, 2019
Worked well with 9 mm and 223. Not good with 45 acp. Will see if gets better next reload.
Don A***n
Saturday 31 August, 2019
nycreloader here and I have to say that this had made a huge difference in my reloading on my Dillon 650. Almost no powder spill at all this was the last thing I added to completely reduce the spill caused by case movement jerking on movement.
nycreloader ***
Thursday 21 February, 2019
This part must be placed on every dillon,it make the machine better.
Almost no powder spill, and whit bulledfeader less corrections.
Noop van de V***n
Friday 08 February, 2019
simple but great product, especially with Vectan A1 powders
Pierre R***l
Saturday 12 January, 2019
It works fine but it had been better if it was a Little bit longer
sert
Saturday 12 January, 2019
I bought one for my xl650 and it works fine no spilling of powder.
sert