In stock
$23.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options

Latest reviews

Friday 27 November, 2020
The best! easy to install and easy to use and no more guessing!!!
Rating: (5 of 5 Stars!)
Monday 16 November, 2020
No more guessing. Each click seems to give you 1/2 grain with a small powder bar. I like it.
Rating: (5 of 5 Stars!)
Saturday 17 October, 2020
I have these knobs on all my powder measures, they work great for making adjustments. I used to use the micrometer ones, but found them difficult to see and adjust. The DAA knobs are easy to install and use.
Rating: (5 of 5 Stars!)
Tuesday 15 September, 2020
Awesome tool. Of course it is possible to adjust amount of powder without the knob, but it makes it so much easier.
I will order another one for my second powder die.
Rating: (5 of 5 Stars!)
Saturday 05 September, 2020
Good product, making powder adjustment easier, ordered a second one.
Rating: (5 of 5 Stars!)
Thursday 23 July, 2020
Purchased knob recently, gentlemen who wrote these all 5 stars reviews ? Nobody noticed that version DAA has on picture(and this is exactly what I get from DAA) has reverse order in comparison with video ad, thus if you rotate it to in "+" direction indicated number reduced, and v.v. rotate to...
Rating: (1 of 5 Stars!)
Sunday 19 July, 2020
Easy install and works great. Will add to all quick change setups.
Rating: (5 of 5 Stars!)
Monday 08 June, 2020
I was not able to fit the back part of the Click-Adjuster on my Dillon XL-750 reliably when using the DAA Mr. Bulletfeeder Pro Dropper. The brass part of the dropper hits and jam the bullet dropper, so I only have the front part mounted thus loosing the "Click-Adjustment" and only gaining the...
Rating: (2 of 5 Stars!)
Sunday 31 May, 2020
Fantastic addition to the Dillon xl650 press. Keeps powder measurements accurate . The clickable knob keeps the powder bar screw from moving. Just wish you guys would make one for the large powder bar as well.
Rating: (5 of 5 Stars!)
Sunday 31 May, 2020
Fantastic addition to the Dillon xl650 press. Keeps powder measurements accurate . The clickable knob keeps the powder bar screw from moving. Just wish you guys would make one for the large powder bar as well.
Rating: (5 of 5 Stars!)
Thursday 14 May, 2020
A really nice addition works well Easy install on my dillon 550c
Rating: (5 of 5 Stars!)
Wednesday 04 March, 2020
This is a great device. It is simple to install and very accurate. It enables you to keep track of your powder loads and makes it incredibly easy to return to an exact load if an experimental load turns out less than desired. Great for loading multiple bullet weights and achieving the desired...
Rating: (5 of 5 Stars!)
Saturday 02 November, 2019
Click increments make dialing in precision charges a breeze. EZ two-step mounting process no need to remove the nut it fits right over. Tightens with allen-hex. Very pleased with the quality
Rating: (5 of 5 Stars!)
Thursday 31 October, 2019
Very useful. Make a table for the powder you are using (y on the dial=xx.x grain, etc) and setting/trying new loads becomes a lot quicker than the trial and error method before.
Rating: (5 of 5 Stars!)
Saturday 17 August, 2019
Very easy to install, works great and it is a useful addon for your reloading press, well done.
Rating: (5 of 5 Stars!)
Thursday 15 August, 2019
Fantastic addition to the Dillon powder measure. The click adjustment is great. I know that my powder will be precise every time. Holds the measurement well. Thanks for making such a great add on
Rating: (5 of 5 Stars!)
Saturday 27 July, 2019
Incredibly easy to install, and definitely added improved repeatability in reloading adjustments. Now instead of trying to gauge by fractional turns and sharpie marks, I just index by clicks. A definite, easy improvement to consistent powder adjustment.
Rating: (5 of 5 Stars!)
Wednesday 03 July, 2019
Incredibly easy to install, no disassembly of the powder bar required, and no interference with charge dispensing. Took all of two minutes to install, and nice, clean uniform indexed charge changes now.
Rating: (5 of 5 Stars!)
Wednesday 08 May, 2019
This is very nice and I look forward to using it, I think it will save time in setting your load and I'm looking forward to using it
Rating: (5 of 5 Stars!)
Wednesday 01 May, 2019
Works as advertised. Easy to install. I can't imagine a Dillon powder measure without one.
Rating: (5 of 5 Stars!)

DAA Click-Adjustable Powder knob V2

(23)
Manufacturers: Double-Alpha Academy

Description:

The DAA Click-Adjustable Powder Knob V2, is the 2nd generation offering from DAA. Building on the experience and feedback of the first model, this one is, simply put, better!

The two piece aluminum structure eliminates the need to tie the base piece to the powder dropper, and the assembled spring-loaded steel balls (2 of them, for smoother function) make assembly a breeze. (No more battling with trying to keep the steel ball in place which assembling the knob!)
The DAA Click-Adjustable Powder Knob V2 makes setting and adjusting your powder charge much easier and more precise. And it looks so cool too!

The large 32mm round, aluminum machined and laser engraved knob, is knurled around the outer edge making it easy and convenient to rotate the bolt and adjust the charge. The two piece system includes two spring-ball assemblies, which click over pockets in the back of the knob, creating loud audible clicks to accurately rotate the dial in steps of 18deg, 20 clicks per rotation. These adjustments are easily small enough for any practical adjustment of the measured powder charge.

The laser engraved dial indicates direction for increasing or decreasing the charge, and the numbers make it easy to keep track of what the correct position should be for one load or another.
The DAA Click-Adjustable Powder Knob V2 assembles in seconds on your existing Dillon powder dispenser adjustment bolt. A 2mm Allen key is required (not included)

Designed for use on the Small Dillon Charge bar. Does not fit the large Rifle charge bar!
Watch the video for assembly instructions.

 

Reviews (23)

Friday 27 November, 2020
The best! easy to install and easy to use and no more guessing!!!
Monday 16 November, 2020
No more guessing. Each click seems to give you 1/2 grain with a small powder bar. I like it.
Saturday 17 October, 2020
I have these knobs on all my powder measures, they work great for making adjustments. I used to use the micrometer ones, but found them difficult to see and adjust. The DAA knobs are easy to install and use.
Tuesday 15 September, 2020
Awesome tool. Of course it is possible to adjust amount of powder without the knob, but it makes it so much easier.
I will order another one for my second powder die.
Saturday 05 September, 2020
Good product, making powder adjustment easier, ordered a second one.
Thursday 23 July, 2020
Purchased knob recently, gentlemen who wrote these all 5 stars reviews ? Nobody noticed that version DAA has on picture(and this is exactly what I get from DAA) has reverse order in comparison with video ad, thus if you rotate it to in "+" direction indicated number reduced, and v.v. rotate to "-" numbers increased. Sure we can count clicks, but is there any Quality Control to compare ad with real product?




[DAA reply]: the direction of the engraving on the knob was change intentionally, this was not a QC issue. Many users gave feedback it would be more intuitive like this. Seems opinions vary in this regard, as far as the direction of the numbering. The most important is the markings of the arrow direction “+” or “-” which is correct and is unchanged. The plus is the direction to turn to add powder, and the minus is to reduce. Happy reloading!
Sunday 19 July, 2020
Easy install and works great. Will add to all quick change setups.
Monday 08 June, 2020
I was not able to fit the back part of the Click-Adjuster on my Dillon XL-750 reliably when using the DAA Mr. Bulletfeeder Pro Dropper. The brass part of the dropper hits and jam the bullet dropper, so I only have the front part mounted thus loosing the "Click-Adjustment" and only gaining the knob function.
Sunday 31 May, 2020
Fantastic addition to the Dillon xl650 press. Keeps powder measurements accurate . The clickable knob keeps the powder bar screw from moving. Just wish you guys would make one for the large powder bar as well.
Sunday 31 May, 2020
Fantastic addition to the Dillon xl650 press. Keeps powder measurements accurate . The clickable knob keeps the powder bar screw from moving. Just wish you guys would make one for the large powder bar as well.
Thursday 14 May, 2020
A really nice addition works well Easy install on my dillon 550c
Wednesday 04 March, 2020
This is a great device. It is simple to install and very accurate. It enables you to keep track of your powder loads and makes it incredibly easy to return to an exact load if an experimental load turns out less than desired. Great for loading multiple bullet weights and achieving the desired power factor for each. I have researched quite a few powder adjustment knobs and this is really the best one. DAA is great to deal with - very quick shipping. I wish they would stop inventing great shooting accessories, it's costing me too much. Just kidding - fantastic addition to my re-loader and well worth the price.
Saturday 02 November, 2019
Click increments make dialing in precision charges a breeze. EZ two-step mounting process no need to remove the nut it fits right over. Tightens with allen-hex. Very pleased with the quality
Thursday 31 October, 2019
Very useful. Make a table for the powder you are using (y on the dial=xx.x grain, etc) and setting/trying new loads becomes a lot quicker than the trial and error method before.
Saturday 17 August, 2019
Very easy to install, works great and it is a useful addon for your reloading press, well done.
Thursday 15 August, 2019
Fantastic addition to the Dillon powder measure. The click adjustment is great. I know that my powder will be precise every time. Holds the measurement well. Thanks for making such a great add on
Saturday 27 July, 2019
Incredibly easy to install, and definitely added improved repeatability in reloading adjustments. Now instead of trying to gauge by fractional turns and sharpie marks, I just index by clicks. A definite, easy improvement to consistent powder adjustment.
Wednesday 03 July, 2019
Incredibly easy to install, no disassembly of the powder bar required, and no interference with charge dispensing. Took all of two minutes to install, and nice, clean uniform indexed charge changes now.
Wednesday 08 May, 2019
This is very nice and I look forward to using it, I think it will save time in setting your load and I'm looking forward to using it
Wednesday 01 May, 2019
Works as advertised. Easy to install. I can't imagine a Dillon powder measure without one.