Save 25Euro/25USD when purchasing this bundle consisting of:
1x C-More RTS2 Scope
1x DAA RTS2 Scope Mount
The latest C-More RTS2 red dot reflex sight series. It is the smallest reflex sight. Like other C-More competition sights, the all new RTS2 head up display provides an unobstructed sight picture in which the red dot hovers on the sight line, illuminating the point of impact on the target, allows you the fastest target acquisition possible, without straining your eyes. It also uses a beam-splitter lens made of hard coated glass for maximum scratch resistance and light transmission. The parallax free design enables targets to be acquired without the need to center the dot in the lens.
The RTS2 uses a CR2032 lithium battery, which can be replaced without dismounting the sight. This eliminates the trouble of re-zeroing after replacing the battery. And the battery compartment is O-ring sealed for waterproofing. A 10 position manually operated push button switch provides precision intensity adjustment, previous intensity return, and auto off after 8 hours of inactivity.
The C-MORE RTS2 series reflex sight is made of aviation alloy housing. And the electronics within are designed to handle the hottest loads from large caliber firearms. The RTS2 provides 1 moa click adjustment for windage and elevation resulting in supreme accuracy. A positive locking screw for both windage and elevation lock the adjustment screws in position.
Note: The RTS2 can be attached to a Picatinny or Weaver Rail out of the box, or with the Rail Mount removed to mount the sight directly.
The RTS2 Package comes with:
- 1 x RTS2 red dot reflex sight
- 1 x RTS2MT200 Rail Mount (Attached)
- 1 x Protective Sight Cover
- 1 x CR2032 Battery (Installed)
- 1 x Adjustment Wrench
- 2 x Rail Mount Wrenches
- 2 x Direct Mounting Screws with Wrench
- 1 x Instruction Manual
DAA Scope Mount
DAA launches the new RTS2 2011 mount! Precision made with 100% machined aircraft grade aluminum to provide a long lasting durable life.
The RTS2 2011 mount is streamlined to just 2mm of clearance above a flattened 2011 slide. Note: This may create a tight fit if no material has been removed from the top of the slide.
The mount is designed with several mounting holes on the side to incorporate the included serrated wide thumb paddle allowing the user to adjust the position of the thumb rest as desired. There are more than twenty adjustments in both height and angle to select from. The choice of using this addition or leaving it off is up to you! A steel pin attaches the thumb rest and a M3 socket screw which is also included.
The mount design is created to align the sight with the center of the slide and as close to the slide as possible. The design allows a forward-positioned Slide-Racker (as is included with the STI DVC Open pistols) to fit with the mount in place. It is designed for the Slide-Racker to be used on either side of the pistol, so the user has the choice of left or right!
The mounting surface for the sight includes locating pins which have been machined directly from the solid aluminum block material to ensure an excellent precision fit to the C-More RTS2 sight. Additionally, a compact and very functional blast shield is designed into the mount, helping to deflect muzzle blast away from the lens of the sight.
The pattern mounting hole is the standard C-More design, with a 4th hole added between the front and middle holes.
Due to the wide variety of mounting screws and threads in use – mounting screws are not included with this mount. Use screws that fit the threads your frame already has, or as recommended by the Gunsmith when drilling and tapping your frame. The DAA recommended screw is the M4 Torx.
The height of the mount, from the center of the mounting holes to the underside of the scope platform is 29.8mm.
ote: RTS2 cannot be sold/shipped to Canada.