In stock
$44.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options

Latest reviews

Saturday 26 March, 2022
Great product! Now I don't have to change out the case feeder unless I'm doing rifle cases. For 45 long Colt just drop a spacer under it. I suspect the spacer may be needed for 357 Mag cases but I haven't tried them yet. I highly recommend this product if you are tired of casings like 380 auto...
Rating: (5 of 5 Stars!)
Friday 18 March, 2022
love this plate feeds in most of the slots compared to the Dillon plates which skips a lot of the slots feeds a lot faster
Rating: (5 of 5 Stars!)
Sunday 13 March, 2022
I got a new Dillon 750 with their case feeder and never went more than 20 cases before it would jam no matter what I tried adjusting. I ended up getting this DAA plate and without any adjustments I haven't had a single jam since. Nothing but smooth flowing cases into the tube. Thumbs up.
Rating: (5 of 5 Stars!)
Thursday 10 March, 2022
I was surprised how well it works. It keeps me from having to find and swap different plates.
Rating: (5 of 5 Stars!)
Thursday 10 March, 2022
Greatest upgrade to the Dillon case feeder yet.

On the slowest feeding calibers it averages a 120% increase in case feed speed.
Rating: (5 of 5 Stars!)
Monday 07 March, 2022
Really impressive part. I have a two speed casefeeder that has sucked since new, couldn't handle more than 200 9mm cases and jammed a lot, it made loading a pain. I bought this and after installing I now have a decent performing case feeder and one plate for both my 9mm and 45ACP. A great upgrade...
Rating: (5 of 5 Stars!)
Sunday 06 March, 2022
Works exactly as described. Improves speed and efficiency. I can run it at maximum speed when using it with the large Roll Sizer.
Rating: (5 of 5 Stars!)
Friday 04 March, 2022
Works Great. I ran over 10k of 9mm and about 1k of 45ACP through it so far with no issues. Only had 2 upside down cases. Not bad.
Rating: (5 of 5 Stars!)
Saturday 26 February, 2022
Great works perfectly. You have to try it, will stop a lot of frustration
Rating: (5 of 5 Stars!)
Wednesday 23 February, 2022
The DAA Case Feeder Plate works much better than the original Dillon Small Pistol plate for feeding 9mm brass. If it works as good with 38 Special cases, I will be ordering another. The combination of Dillon 750, DAA Case Feeder Plate and DAA Mr. Bulletfeeder has nearly doubled my previous...
Rating: (5 of 5 Stars!)
Tuesday 22 February, 2022
Awesome plate. Excellent gift for your reloading friends!
Rating: (5 of 5 Stars!)
Monday 21 February, 2022
Very very good Caseplate worked realy gread.
i already bought a second on
Rating: (5 of 5 Stars!)
Sunday 13 February, 2022
Very happy with the performance of this turbo plate.
Rating: (5 of 5 Stars!)
Wednesday 09 February, 2022
Running on a M7 Apex 10 with new Variable Speed Case Feeder.

Just swap the center clutch assembly out with the center assembly from a Dillon feeder plate and it runs in the M7 with NO issues!

I run at speed 4 on my case feeder while processing at 3k per hour and it keeps the chute full. I can...
Rating: (5 of 5 Stars!)
Wednesday 09 February, 2022
We just purchased a couple of these for some of our case feeders. We have been using them full time with great success. We really like them; in fact, we are getting ready to order a couple more.
Quick aside - The best results have been on 9mm, 40SW, 10mm and 44 Magnum.
Rating: (5 of 5 Stars!)
Monday 31 January, 2022
So good that I bought a second one for my number two case feeder. I have tested it with .380 through 45 acp with perfect results. I found the openings too small for .45 Colt brass, though, so I still have to use the Dillon Large Pistol case feeder plate on occasion.
Rating: (5 of 5 Stars!)
Sunday 30 January, 2022
finnaly used it today on a dillon 750 reloading 45's worked perfectly.
Later this week I will be reloading 9mm if I have any problems I will edit this
Rating: (5 of 5 Stars!)
Sunday 30 January, 2022
Works great. Got it for the roll sizer, got another for decapper and decided to get another for the Dillon.
Rating: (5 of 5 Stars!)
Monday 24 January, 2022
All i can say is super fast and no jam ups. Another great product by DAA
Rating: (5 of 5 Stars!)
Monday 24 January, 2022
genial, keine verdrehten Hülsen mehr. Absolute sichere Zuführung.
Rating: (5 of 5 Stars!)

DAA Turbo Case-Feeder Plate - pistol calibers

(70)
Manufacturers: Double-Alpha Academy

Description:

The DAA Turbo Case-Feeder Plate is a highly modified and evolved reloading accessory which will greatly increase the output speed of your current Dillon case feeder.

The plate is designed to handle all pistol calibers – from .380 to 0.45, so one plate can now handle all your pistol calibers!

** For the very long revolver cases (38SPL and 357) the plate must be elevated using a large washer (not included). Not recommended for use with .44MAG.

The DAA Turbo Case-Feeder Plate is built very differently from the original Dillon Plate. Our plate is much thicker, and incorporate deep feeding grooves into each of the 32 output pockets on the plate. These grooves greatly improve the efficiency of picking up brass as the plate rotates, ensuring that more of the pockets output a case, on each rotation. This increases the output speed by 30-80% compared to the original plate. (output speed gain varies per caliber. Highest gains are with 9mm, lowest with .45)

The thicker plate design also serves to offer better support to the cases as they drop out the exit hole, reducing the likelihood of them rotating on the way out and possible causing a hang-up in the output funnel.

The DAA Turbo Case-Feeder Plate includes an aluminum slip clutch assembly at its center, to insure the disc can slip and not stall the motor if a jam occurs. Our slip-clutch assembly includes a handy stainless steel D-ring which makes it much easier to grab hold of the plate from its center and lift it up off the motor shaft, and out the case feeder. (experienced reloaders will know that this can be difficult to do without such a feature, especially with a well-used, dirty plate/casefeeder)

The 292mm diameter of the DAA Turbo Case-Feeder Plate make it a drop-in fit for both the original AC Dillon case feeder, as well as the newer Variable Speed DC model. It will also fit and can be used in the Mark7 case feeders and the Hornady case feeder as well. (It is recommended to use the Dislodge-Wedge in Hornady case feeders)

Each DAA Turbo Case-Feeder Plate ships including the innovative DAA Dislodge-Wedge for Dillon Variable speed Casefeeder (also sold separately). This wedge replaces the original Dillon wedge in the Variable speed case feeder, further improving performance. (customers not using the Dillon variable speed case feeder, may not use this wedge). This larger, contoured wedge fits down to the base of the plate and eliminates case pinching and jamming, experienced occasionally with the original, smaller Dillon wedge.

 

Need to output even faster?!

While developing this product, we noticed that the Dillon Variable speed motor is wired so that it slows down and speeds up gradually each time the Switch is triggered under the output chute. While running at full speed, our plate was outputting cases in almost every pocket – and triggering this switch very frequently as the cases fall past it down the tube… This lead to the motor slowing down significantly... We found that at full speed – the case feeder would slow down and rotate no faster than it did at half speed. 

So to  unlock the full potential of the new plate, we found a simple wiring modification to the Dillon motor, which prevents this from happening. once done, the motor does not slow down as much, and we were able to clock output rates of over 12,000 9mm cases per hour! If you are in need of such high output rates (for a commercial Rollsizer, decapper or so on) check out the instructions here.

Reviews (70)

Saturday 26 March, 2022
Great product! Now I don't have to change out the case feeder unless I'm doing rifle cases. For 45 long Colt just drop a spacer under it. I suspect the spacer may be needed for 357 Mag cases but I haven't tried them yet. I highly recommend this product if you are tired of casings like 380 auto getting jammed up while reloading.
Friday 18 March, 2022
love this plate feeds in most of the slots compared to the Dillon plates which skips a lot of the slots feeds a lot faster
Sunday 13 March, 2022
I got a new Dillon 750 with their case feeder and never went more than 20 cases before it would jam no matter what I tried adjusting. I ended up getting this DAA plate and without any adjustments I haven't had a single jam since. Nothing but smooth flowing cases into the tube. Thumbs up.
Thursday 10 March, 2022
I was surprised how well it works. It keeps me from having to find and swap different plates.
Thursday 10 March, 2022
Greatest upgrade to the Dillon case feeder yet.

On the slowest feeding calibers it averages a 120% increase in case feed speed.
Monday 07 March, 2022
Really impressive part. I have a two speed casefeeder that has sucked since new, couldn't handle more than 200 9mm cases and jammed a lot, it made loading a pain. I bought this and after installing I now have a decent performing case feeder and one plate for both my 9mm and 45ACP. A great upgrade to the Dillon case feeder. Works so well I bought a second plate to use in my other casefeeder.
Sunday 06 March, 2022
Works exactly as described. Improves speed and efficiency. I can run it at maximum speed when using it with the large Roll Sizer.
Friday 04 March, 2022
Works Great. I ran over 10k of 9mm and about 1k of 45ACP through it so far with no issues. Only had 2 upside down cases. Not bad.
Saturday 26 February, 2022
Great works perfectly. You have to try it, will stop a lot of frustration
Wednesday 23 February, 2022
The DAA Case Feeder Plate works much better than the original Dillon Small Pistol plate for feeding 9mm brass. If it works as good with 38 Special cases, I will be ordering another. The combination of Dillon 750, DAA Case Feeder Plate and DAA Mr. Bulletfeeder has nearly doubled my previous production rate. Great Products!
Tuesday 22 February, 2022
Awesome plate. Excellent gift for your reloading friends!
Monday 21 February, 2022
Very very good Caseplate worked realy gread.
i already bought a second on
Sunday 13 February, 2022
Very happy with the performance of this turbo plate.
Wednesday 09 February, 2022
Running on a M7 Apex 10 with new Variable Speed Case Feeder.

Just swap the center clutch assembly out with the center assembly from a Dillon feeder plate and it runs in the M7 with NO issues!

I run at speed 4 on my case feeder while processing at 3k per hour and it keeps the chute full. I can run at speed 10 and easily pushes 10k rounds per hour.

MUST HAVE! Processed 7k of 9mm and didn’t have a single hang up from the case feeder.
Wednesday 09 February, 2022
We just purchased a couple of these for some of our case feeders. We have been using them full time with great success. We really like them; in fact, we are getting ready to order a couple more.
Quick aside - The best results have been on 9mm, 40SW, 10mm and 44 Magnum.
Monday 31 January, 2022
So good that I bought a second one for my number two case feeder. I have tested it with .380 through 45 acp with perfect results. I found the openings too small for .45 Colt brass, though, so I still have to use the Dillon Large Pistol case feeder plate on occasion.
Sunday 30 January, 2022
finnaly used it today on a dillon 750 reloading 45's worked perfectly.
Later this week I will be reloading 9mm if I have any problems I will edit this
Sunday 30 January, 2022
Works great. Got it for the roll sizer, got another for decapper and decided to get another for the Dillon.
Monday 24 January, 2022
All i can say is super fast and no jam ups. Another great product by DAA
Monday 24 January, 2022
genial, keine verdrehten Hülsen mehr. Absolute sichere Zuführung.

Also Available In Set(s)

You may also be interested in