In stock
$49.90

Choose options

DAA Toolhead LED Lighting Controller Unit
1 item(s)
$19.95
Total Price:
Choose options

Latest reviews

Wednesday 12 April, 2023
Produit de bonne qualité.
Envoi rapide et très bien emballée je recommande
Rating: (4 of 5 Stars!)
Wednesday 06 July, 2022
Now I have it on Apex10/Autodrive. A great product, easy to install. A big improvement of safety and confort when reloading.
Rating: (5 of 5 Stars!)
Thursday 14 July, 2022
I always have a lamp with a clamp attached to my press to check if there is powder in case or if there is powder residue somewhere on my press. The DAA Toolhead LED lighting system is a great addition and easy to use. It's not something you necessarily need to load effectively, but it makes...
Rating: (5 of 5 Stars!)
Friday 16 September, 2022
This is a nice addition; I really like that I can put one on every head and use the same power supply.
Rating: (5 of 5 Stars!)
Sunday 09 October, 2022
This product is super. It has a super bright light that you can dim to your liking. I received the item in a couple of days . It was shipped immediately after ordering. I have only good things to say about Competitive Edge Dynamics.
Denny
Rating: (5 of 5 Stars!)
Tuesday 22 November, 2022
The idea is really perfect. You see a lot better what you are doing
Rating: (5 of 5 Stars!)
Wednesday 07 December, 2022
Fantastic product and easy to install.
The light is perfect when you also can adjust the brightness of the light.
Now I see the level of powder in the case and all that goes on during my reloading very well. Good stuff...
Rating: (5 of 5 Stars!)
Saturday 10 December, 2022
This is the greatest Press Light on the Market period! Super bright full coverage. They really nailed it with this one!! Worth 3 times what they charge!! Nice job Double Alpha. Using it on an Apex 10!!
Rating: (5 of 5 Stars!)
Monday 02 January, 2023
Good product and sits well and gives good lighting while reloading.
Rating: (5 of 5 Stars!)
Thursday 19 January, 2023
Ottima soluzione e decisamente più funzionale rispetto ad altri prodotti della concorrenza che sfruttano il foro centrale della testa ma che non possono avere la luce diffusa come nel caso di questo prodotto.
Rating: (5 of 5 Stars!)
Tuesday 13 December, 2022
Excellent LED lighting for my Evolution, bright, adjustable, easy to install, stays in place and at the best price on the internet! Highly recommend
Rating: (5 of 5 Stars!)
Sunday 20 November, 2022
Great product. They were easy to install and they provide great lighting for my Mark 7 Revolutions.
Rating: (5 of 5 Stars!)
Thursday 13 October, 2022
easy to install works great very high quality this is a great purchase set-up video helped for a much easier install
Rating: (5 of 5 Stars!)
Friday 29 July, 2022
This is a product, where i've waiting for ;-)
The time of my spotlight is over and now i can see every (!) station.
Rating: (5 of 5 Stars!)
Wednesday 27 July, 2022
Super bright light and adjustable! Perfect! Fair pricing!
Rating: (5 of 5 Stars!)

Complete Unit - DAA Toolhead LED Lighting System - Mark 7 Apex/Evo/Revo

(15)
Manufacturers: Double-Alpha Academy
Light Note:
It is very important that you thoroughly degrease the underside of your toolhead before attempting to glue the board into place. This is important for used as well as new tool heads. If you fail to do so, the adhesive won’t hold and the board will come loose. Watch the video for instructions.

Description:

This is a complete DAA Toolhead LED Lighting System for Mark 7 Apex10/Evo/Revo.

Enjoy a perfectly lit shell-plate as you reload on your Mark 7 Apex10/Evo/Revo with our DAA Toolhead LED Lights. Make your reloading easier and less strenuous on the eyes, while avoiding mistakes in your reloading process.

Board:

The DAA ToolHead LED lighting PCB is made of a high quality Aluminum PCB board, making it stronger and stiffer than normal plastic PCBs. It’s white color increases light reflection making the board even more effective.

The ToolHead LED lights ship pre-fitted with a precisely cut, high-quality double-sided adhesive tape, enabling you to firmly and permanently attach the board to the underside of your toolhead.

We designed our tool head PCBs to carry only the LED lights and connector plug, moving all other electronics from LED board to the controller unit. This allows us to offer the boards at a cheaper price, saving you big when you need multiple boards for your multiple toolheads. And since the same controller can power all boards – only one controller is needed, even if you use more than one model of reloading machine.

The Mark7 model PCB has 10 bright LED lights. All type boards can be powered by our custom built controller unit, which identifies the board type it is plugged into and then drives it correctly supplying it voltage and current to support its number of LEDs. You can only use these LED boards with a DAA controller unit and cable!

The controller unit includes a Dimmer feature, so you adjust the light to be perfect for you.

Controller Unit:

The DAA ToolHead LED Lighting Controller unit will power any of the DAA LED toolhead lights, be it the small 550 board with 4 LEDs  or all the way up to the largest Mark7 board with its 10 LEDs. The smart electronics identifies the board and powers it correctly in every case.

The compact, custom made controller and housing unit includes a roller type ON/OFF switch which also provides a Dimmer feature enabling you to set the light just to your preference.

The controller unit includes:

  • Controller unit with ON/OFF/DIMMER roller switch
  • A short 30cm cable to connect the controller to the board.
  • A Velcro double-side tab to glue to controller to your press.
  • A 110/220 power supply with 2M lead, and two sets of prongs (US and EU)

 

Reviews (15)

Wednesday 12 April, 2023
Produit de bonne qualité.
Envoi rapide et très bien emballée je recommande
Wednesday 06 July, 2022
Now I have it on Apex10/Autodrive. A great product, easy to install. A big improvement of safety and confort when reloading.
Thursday 14 July, 2022
I always have a lamp with a clamp attached to my press to check if there is powder in case or if there is powder residue somewhere on my press. The DAA Toolhead LED lighting system is a great addition and easy to use. It's not something you necessarily need to load effectively, but it makes visibility and lighting a negligible issue. Sticking was not an issue if you clean the surface first, and I hope it stays that way.
Friday 16 September, 2022
This is a nice addition; I really like that I can put one on every head and use the same power supply.
Sunday 09 October, 2022
This product is super. It has a super bright light that you can dim to your liking. I received the item in a couple of days . It was shipped immediately after ordering. I have only good things to say about Competitive Edge Dynamics.
Denny
Tuesday 22 November, 2022
The idea is really perfect. You see a lot better what you are doing
Wednesday 07 December, 2022
Fantastic product and easy to install.
The light is perfect when you also can adjust the brightness of the light.
Now I see the level of powder in the case and all that goes on during my reloading very well. Good stuff...
Saturday 10 December, 2022
This is the greatest Press Light on the Market period! Super bright full coverage. They really nailed it with this one!! Worth 3 times what they charge!! Nice job Double Alpha. Using it on an Apex 10!!
Monday 02 January, 2023
Good product and sits well and gives good lighting while reloading.
Thursday 19 January, 2023
Ottima soluzione e decisamente più funzionale rispetto ad altri prodotti della concorrenza che sfruttano il foro centrale della testa ma che non possono avere la luce diffusa come nel caso di questo prodotto.
Tuesday 13 December, 2022
Excellent LED lighting for my Evolution, bright, adjustable, easy to install, stays in place and at the best price on the internet! Highly recommend
Sunday 20 November, 2022
Great product. They were easy to install and they provide great lighting for my Mark 7 Revolutions.
Thursday 13 October, 2022
easy to install works great very high quality this is a great purchase set-up video helped for a much easier install
Friday 29 July, 2022
This is a product, where i've waiting for ;-)
The time of my spotlight is over and now i can see every (!) station.
Wednesday 27 July, 2022
Super bright light and adjustable! Perfect! Fair pricing!
You may also be interested in