In stock
$73.90 $70.20
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.

Choose options

DAA Magnet Cover
1 item(s)
$11.95
Alpha-XiP with Magnet
1 x Alpha-XiP with Magnet
 In stock
1 item(s)
$61.95
Total Price:
Choose options

Latest reviews

Sunday 17 April, 2022
Works very well, I did move magent to bullets out orientation.

Placing magnet on side, Double alpha has instruction on youtube how to install a magnet kit on the xip pouches. I did the reverse to remove and then I reinstalled on side, worked out great.
Rating: (5 of 5 Stars!)
Wednesday 08 December, 2021
These are awesome pouches. Almost as good as the Gucci metal ones but much easier on the pocket, which is good for a beginner like me. There are so many set up options that it may take you a while to find the best one for your rig but I've just about settled on one that I like. You can alter the...
Rating: (5 of 5 Stars!)
Monday 25 October, 2021
This is set up for right handers(if you want the magnet towards the front of the pouch). I was able to move the magnet to the opposite side the pouch with a longer bolt, nut and make it work though.
Rating: (5 of 5 Stars!)
Wednesday 01 September, 2021
The improvements over the previous generation polymer Racer mags are very welcome. The swivel for more range of motion and the Torx swap were subtle but made adjustment a breeze. Would definitely recommend.
Rating: (5 of 5 Stars!)
Tuesday 24 August, 2021
I just received the pouches in the mail. Honestly, the website does not do it justice. The body is very durable. For reference, I would say that the body is made out of a thicker material than kydex used in your typical safariland, blade tech, alien gear holster. The ball joint and belt...
Rating: (5 of 5 Stars!)
Friday 16 July, 2021
I am a software engineer by trade and I have to say that I am VERY PICKY when it comes to engineering. This product is by far the easiest and most intuitive mag pouch I have ever seen or used. It took me less than an hour to configure my holster and two (2) of these mag pouches with magnets on a...
Rating: (5 of 5 Stars!)
Wednesday 19 May, 2021
These are exactly what I've always wanted. 100% improvement over the previous models of mag pouches.
Rating: (5 of 5 Stars!)
Sunday 10 January, 2021
Now that’s a super noticeable upgrade to the previous Aluminum pouches I had for more than 4 years. Significantly easier to adjust - even with your rig on, looks solid - high quality polymer, pouch attachment elevation option, mag depth bridge to smartly adjust how deep your mags go into the...
Rating: (5 of 5 Stars!)

Combo: Alpha-XiP Pouch with Magnet and Magnet Cover

(8)
Manufacturers: Double-Alpha Academy

Description:

Complete Alpha-XiP magazine pouch with magnet and magnet cover.

The DAA Alpha-XiP magazine pouch is a more affordable version of our flag-ship Alpha-Xi pouch. By incorporating an injection-moulded pouch body instead of the CNC machined aluminum and anodized pouch body of the Alpha-Xi, we are able to offer all the same great features at a substantially lower price!

The Polymer used in the pouch body of the Alpha-XiP is a glass-fiber reinforced PA66 material, which is extremely hard and durable. This allows us to  use the same mounting system as used in the aluminum body. Other than the pouch body material itself, the Alpha XiP and Alpha Xi are identical. Both incorporate the same Aluminum ball-joint hanger and include a full set of spacers to support a wide array of magazines.
The Polymer body is not only cheaper than the aluminum option, but it also will not show scratches or wear over time as the aluminum tends to. And while it does not use color inlays as the Alpha-Xi does – it is currently available in 7 striking colors, including Black, Blue, Red, Grey, White, Purple and Orange.

The Alpha XiP pouch body offers 8 connection points to choose from – three height positions each for Right-hand or Left-hand shooters, and two height options for bullets-out mounting. A Key-seat engagement is used in combination with the custom wide-head screw, to prevent any possible wiggle, movement or weakness.

The ball joint is held in the aluminum belt hanger using a pressure coupling with a large T25 Torx M6 Screw. This offers a totally secure lock up and the option to make minute adjustments to the pouch’s angle and tilt.
To further elevate the quality and durability of the product, the Allen screws have all been replaced with T20 and T25 Torx-head screws, and a custom made key which incorporates both these sizes is included.
The Alpha-XiP utilizes the wrap-around spacers, which align all magazine sizes in the center of the pouch body, while fully enveloping them with polymer, to prevent any possible binding and to create the smoothest draw of the magazine.
The spacer system incorporates a height-adjustable bridge support under the magazine, allowing the user to determine how deeply the magazine seats into the pouch.

Three sets of spacers are included as standard with every pouch, to fit all double-stack magazines (excluding the very large Glock/HK .45 mags). A single-stack spacer adaptor is available too and is sold as an accessory.

 

Reviews (8)

Sunday 17 April, 2022
Works very well, I did move magent to bullets out orientation.

Placing magnet on side, Double alpha has instruction on youtube how to install a magnet kit on the xip pouches. I did the reverse to remove and then I reinstalled on side, worked out great.
Wednesday 08 December, 2021
These are awesome pouches. Almost as good as the Gucci metal ones but much easier on the pocket, which is good for a beginner like me. There are so many set up options that it may take you a while to find the best one for your rig but I've just about settled on one that I like. You can alter the height of the internal sleeve as well as the depth of the sleeve itself which gives you an almost endless variation on the ultimate height of the magazine. Then you can alter the angle of the pouch infinately because each one is ball joint mounted to your belt. In addition to this you can also mount sideways or end on!

I chose a combination of height, side AND end on mounted but then I'm kinda strange like that, three sideways and two end on. My rig looks weird but everything falls easily to hand which I guess is the ultimate solution and fast for me. I find my arm twists differently the further back I reach which is why I chose to mount the pouches end AND side on. It works well for me as I said but you can choose any which way you want... anyway that is but NEVER loose!

Don't forget the magnets either. I wasn't sure at first being paranoid of dropping a mag halfway through a stage but I needn't have worried. In fact I had to go back and buy the magnet covers because the magnet is SO strong I couldn't pull the magazine off quickly. The addition of the magnet cover makes it perfect and I no longer get attached/pick up, every metal object within 6" that I pass by! Even if you like collecting shiny metal objects as much as a crow the cover is handy to use in your range bag or your rig will emerge with every nut, bolt and allen key in there attached!

The awesome support you get from the guys and gals at Double Alpha is also worth a mention. Those folk bend over backwards to ensure you have the rig you want and the parts you need.

5 stars Double Alpha (again)
Monday 25 October, 2021
This is set up for right handers(if you want the magnet towards the front of the pouch). I was able to move the magnet to the opposite side the pouch with a longer bolt, nut and make it work though.
Wednesday 01 September, 2021
The improvements over the previous generation polymer Racer mags are very welcome. The swivel for more range of motion and the Torx swap were subtle but made adjustment a breeze. Would definitely recommend.
Tuesday 24 August, 2021
I just received the pouches in the mail. Honestly, the website does not do it justice. The body is very durable. For reference, I would say that the body is made out of a thicker material than kydex used in your typical safariland, blade tech, alien gear holster. The ball joint and belt attachment is metal and seems to be very sturdy. I think I will add some locktite to keep the screws from backing out. I cant wait to use them.
Friday 16 July, 2021
I am a software engineer by trade and I have to say that I am VERY PICKY when it comes to engineering. This product is by far the easiest and most intuitive mag pouch I have ever seen or used. It took me less than an hour to configure my holster and two (2) of these mag pouches with magnets on a brand new USA belt, USA USA USA! The engineering behind the slip in shims and how the spring loading works is just flat out PURE GENIUS. Right when I pulled it out of the package I was like, "Oh yeah, this is going to be COOL and EASY." I even tried a couple of different configurations before settling on bullets parallel to waist and magnet towards rear.
Wednesday 19 May, 2021
These are exactly what I've always wanted. 100% improvement over the previous models of mag pouches.
Sunday 10 January, 2021
Now that’s a super noticeable upgrade to the previous Aluminum pouches I had for more than 4 years. Significantly easier to adjust - even with your rig on, looks solid - high quality polymer, pouch attachment elevation option, mag depth bridge to smartly adjust how deep your mags go into the pouch, and more. Oh, even the screws and bolts were upgraded. Love it!