Friday 17 May, 2019
Fits well! I previously own a STI insert block. Equally smooth and excellent build quality.
Kendall L***o
Friday 26 April, 2019
Easy to do with the video and really works well. I have tried several other brands of holsters but, like Double Alpha the best.
Randy M***s
Friday 29 March, 2019
I added a magnetic holster block for my Sig P226 SE recently. It arrived within days of ordering it and it fit without adjustment. This design works perfectly. My pistol is secure and draws short and precise.
Peter
Wednesday 20 March, 2019
I have had the same experience with the Glock insert block assembly as others, and therefore will not go through the fine detail. The block is not deep enough to allow the locking latch to slide all the way to the bottom of it's travel. The only way to get the locking latch to engage is to take material off the top of the insert. Could you please take notice of these concerns and revise the design of this block.
Paul van den B***h
Friday 01 February, 2019
Purchased 2 Inserts - for CZ Czechmate and Tanfoglio Xtreme custom gold team. For CZ it is perfect. No need to adjust at all. Can use also for TS Orange. Win Tanfoglio it is a big design mistake. If you have any Tan Xtreme line gun with square trigger guard be ready to spend a lot of time to cut off at least 1/8\" along the entire side of the block in order to fit it.
[DAA reply]: wrong insert was ordered - you should have selected the Stock III insert and not Stock II.
Vladimir F***n
Friday 07 December, 2018
As always, your products are high quality and work as advertised. I own several magnetic block assemblies and change them per activity to use the weapon best suited for the course of fire. I love the complete rig and will only use your products in competition. Thank you for your attention to detail and craftsmanship!
Bruce C***r
Tuesday 02 October, 2018
I love that you can swap out the blocks. Giving options for different firearms usage. I compete in USPSA Open Division and have swapped out pistols on occasion. These Alpha-X inserts work perfectly every time.
John R***R
Monday 01 October, 2018
Excellent product, I had to adjust a little bit to fit my Tanfoglio Stock 1.
Cesare
Tuesday 21 August, 2018
bought the insert for a Race Master to fit a Tanfoglio Gold Team open gun. I found it easy to install, it locks up tight but comes out like greased lightning when the beep sounds would definitely recommend this setup to anyone looking for a fast holster that is also very secure.
Don B***n
Saturday 18 August, 2018
I have the same issue with this as others have had. I am using this for a Gen 4 Glock and the fit is terrible. I had to remove a lot of material to get it to fit properly. I uderstood when ordering I would have to remove material upon ordering, but I never expected as much as had to be. After I got it to fit it still wouldn't go all the way down so the locking bar would lock. I had to again remove material from a different area to get it to lock. This created about a 1/4" of play when locked. It stays safely in the holster, but for the $50 cost it shouldn't require so much fitting in my opinion.
Rating:
Luc van der H***n
Monday 25 June, 2018
Ordered 2 for the TSO. One did not fit but that's because CZ changed the frame. But I got immediately a replacement for free. This one also fits perfectly. Very nice product! Great Service!
Markus F***l
Wednesday 06 June, 2018
I have the same issue with this as others have had. I am using this for a Gen 4 Glock and the fit is terrible. I had to remove a lot of material to get it to fit properly. I uderstood when ordering I would have to remove material upon ordering, but I never expected as much as had to be. After I got it to fit it still wouldn't go all the way down so the locking bar would lock. I had to again remove material from a different area to get it to lock. This created about a 1/4" of play when locked. It stays safely in the holster, but for the $50 cost it shouldn't require so much fitting in my opinion.
James S***h
Tuesday 05 June, 2018
As with all DAA kit this is an excellent addition to my rig. By using the Alpha X holster I can accommodate all of my different guns without having to run multiple rigs. High quality, excellent fit and very easy to slip in and out of the main holster. First rate as ever.
Graeme C***r
Tuesday 22 May, 2018
This product is made well but has fitment issues on a Glock Gen 4. I am not sure if this is the case for Gen 2, 3, and 5. For the price that this is sold for, this should have a very minimal modification to make your glock fit. There is a major mod that you will be doing in order to make this product fit. You will be cutting or taking off materials on the actual block to get your glock to fit. I was told that not all glocks frames are the same as far as tolerance. But this product IMHO is just way off, I am talking about a lot of materials need to be removed. Not what I was expecting for a company that makes a high end gear.
Jimmy P***o
Monday 09 April, 2018
I have one of these for the Sig P320 and one for the Phoenix Trinity (for my Atlas Titan). These are awesome. Nothing else to say. Holds my heavy 2011 with ease. Allows a fast draw and locks up secure. All the things a good holster should do!
Chris S***r
Monday 26 March, 2018
purchased an insert block for a borrowed racemaster rig. it came quickly and works perfectly. I will definitely be buying my own rig.
Doug C***r
Thursday 08 March, 2018
I love my Alpha X holster. I have used it with my various airsoft Hi Capa pistols, and it worked with all models with no problems. I recently changed my gun to a Tangfolio, and resisted the option of purchasing a holster of a different make. I bought the magnetic assembly for the Tangfolio square trigger guard and it duly arrived. The gun would not lock into the holster, and after some checking it was because the trigger guard was too wide and the gun did not sit down enough to activate the mechanism. I reluctantly resolved to return the insert and order the alternative maker holster. Having thought about this I decided to watch the various DAA videos, get out my trusty Dremel and get to work. After all, the block was a reasonable price and the worse thing that could happen would be I ruined it. After some serious fettling the gun now slips nicely into the holster, locks in place - though I have left the lock just a little on the stiff side so the it will wear in naturally. It would have been nicer to have the gun fit from the start - as you can now see where it has been worked on - but I can now use my Alpha X for my new gun and all is well.
Graeme C***r
Tuesday 21 November, 2017
Work and fit perfectly. I started with one for xdm and now use insert for my dvc 2011. Love this holster! Heads up though they do not come with new screws so make sure u don't loose any.
Bobby
Thursday 09 November, 2017
I purchased the holster with an insert for my single stack 1911. Then bought a second insert for the S&W 686 which I use with an Alpha project revolver. Both do an excellent job of securely retaining the firearms with the lock down, whilst allowing rapid draws with the lock up.
Steve B***k
Tuesday 17 October, 2017
I recently purchased the Racemaster halst insert block for Tanfoglio HC 40, I've bought the second one to have a double equippment and they're amazingly reliable and dependable. I've made a mistake during the order and I've been immediatly assisted and took care of. Thank you for your service and your care and attention. I highly reccomend Double Alpha Academy,they're very professional in their assistance and high quality products.
Bruno