DAA Race Master Magazine Pouch
Totally unique to the competitive shooting world, the DAA Race Master Magazine Pouch, designed by DAA, using advanced Cad-Cam software, is the perfect complementary add-on for the hugely successful and popular DAA Race Master Holster.
The Race Master Aluminum Pouch is a completely original design, unlike anything else seen on the market to date. The perfect match in look and performance to the DAA Race Master Holster.
The aluminum construction, allows design and performance not previously possible in a competition mag pouch. The DAA Race Master Mag Pouch provides a wider and more diverse range of adjustability and mounting options. But, even more importantly, it locks solid tight into the selected position until the user chooses to change them.
The wide range of angle adjustments allow the user to position these magazines just as one wants them. This feature, combined with a unique and superior retention system, creates a smoother and more consistent release, which in turn leads to a more reliable and faster reload.
Where other mag pouches apply pressure from the side of the magazines (right to left), the DAA Race Master pouch’s pressure adjustment wheel applies its load to the back of the magazine, squeezing the magazine tube from back to front instead of left to right, as others do. This is amuch more effective manner, which produces far better results. Since the magazine’s front and back walls are straight and parallel, while the side walls are tapered on all double-stack mags, applying pressure and contact to the back of the mags creates a smoother draw of the magazine. Turning the adjustment wheel changes the tension from very loose to very tight, as may be required on a particular course of fire.
The side and back walls of the Race Master Pouch, have plastic spacers that are design specific to the magazine size. Each Race Master mag pouch is delivered with three sets of spacers: one that fits the larger STI type magazines (assembled as default), and one for the slightly smaller CZ/Tan type double-stack mags. A third pressure spacer is included for Glock/M&P mags. An optional single-stack adapter is available separately.
The hanger system of the DAA Race Master Pouch includes all of the excellent features of the Race Master Holster. The inner side of the hanger fits snugly over the shooter’s outer belt to prevent rocking motion. The hanger can be assembled directly in the desired position, and does not need to slide along the belt, so it can have a tighter fit. The thin steel plate on the inside of the hanger causes no separation between the inner and outer belt. This is critical, when carrying 3 or more pouches side by side. The steel plate can be tightened down, to lock the pouch tightly even on thinner, narrower belts.
The tilt and cant of the Race Master mag pouch is achieved by using a ball-socket joint as in the Race Master Holster. The aluminum ball is locked firmly in place by two set-screws. The ball-socket joint is designed to be set off-center on the belt hanger, which allows the user to choose between two heights when fitting the pouch to his belt. The ball joint locks into the body of the holster so that it will not slip or rotate, even if the center screw comes loose. This is a very unique feature of this pouch.
Three mounting points on the mag pouch body allow for ambidextrous use, as well as making it possible to mount the pouch turned 90 degrees away from the body, which is preferred by some shooters.
The DAA Race Master Magazine Pouch is suitable for right or left-handed shooters, for all double-stack magazines, and is available in Black, Silver, Blue, Red, Purple, Pink, and Gold colors!
Please note that these Race Master pouches are made of aluminium. It is to be expected that the steel magazines will scratch and burr the top edges of the pouch over time. However this has no effect on the function of the pouch itself.
Note: Will not fit Large Frame Glock (eg. G20/21) or .45 HK magazines
The Race Master Pouches will only fit 1.5" belt systems (will not fit Safariland 1.75" belts).
DAA Race Master Magazine Pouch
2908 Betz Court, Orefield, PA 18069
Fax: (610) 366-9680
Q: Are the Race Master pouches ambidextrious?
A: All our pouches are ambidextrous and can be turned around to face the other for LH use. The ball joint in the back side of the RM Pouch is not welded. it may just be a tight fit. Remove the screw holding the side spacer, and then pull on the pouch body - it will come loose off the hanger. Turn the pouch body facing the other way, for LH use, and attach the ball joint on the opposite side. again - the fit is design to...
Q: My Race Master pouch has a tight fit to my magazine. Which spacer do I need to file to make a good fit?
A: Take a look at the following video clip: https://www.youtube.com/watch?v=WnnsG6fvjVc
Q: Do you have to disassemble the pouch to swap out rear pressure spacers?
A: No. Simple turn the tension wheel until there is no more pressure on spacer. Then using your thumbs, push down o n both ends of the rear presser spacer and push upward. This will release the rear pressure spacer and leaf spring, swap our the spacers and set the leaf spring in the spacer, then push the spacer back into the pouch until you hear a click. The chamfered or angled end of the...