Thursday 21 February, 2019
Have purchased two Mr. Bullet Feeder dies and manual bullet feeders for these dies. One is for the 556/223 bullets and the other for 45 ACP. The 45 ACP feeds only Laser Cast lead bullets and it is absolutely great as is the 556/223 feeder and die. Will be purchasing the 6.5 set-up for 6.5 Grendel in the near future. 5 Stars all the way around.
M1919a2
Tuesday 12 February, 2019
I ordered the 45 cal (.452") die assembly for use in my Hornady LNL press to be used with coated bullets. Everything was straight forward but after what seemed like an eternity of making minute adjustments I could never get the die to drop just one bullet at a time. I was going to return it but didn't want to fill out the full page return sheet so perhaps I can use it for my clad bullets in the future. Quality was excellent, it just didn't work with my coated bullets.
George B***r
Tuesday 05 February, 2019
Always fast delivery, I have 5 BFD already and like them so much I picked up 3 body dies and extra bearings so I can swap between progressive and turret.
These are the BEST BFD on the market period and I use nothing else. DAA I know you can do a RL550 case feeder if anyone can.
Michael S***h
Tuesday 05 February, 2019
Always fast delivery, I have 5 BFD already and like them so much I picked up 3 body dies and extra bearings so I can swap between progressive and turret.
These are the BEST BFD on the market period and I use nothing else. DAA I know you can do a RL550 case feeder if anyone can.
Michael S***h
Sunday 03 February, 2019
WOW, works great with my power coated cast pistol bullets and factory jacketed bullets. Simple to setup too. I got the bulletfeeder tubes also, and they drop in without any failures to feed, mounted on my turret press. Thankfullly a friend told me about Double Alpha solution since I mainly load cast bullets and the other Hornady & RCBS solutions have issues with cast bullets.
Stan H***r
Monday 14 January, 2019
After much research and many reviews by posters all over the Net, I had to give DAA products a try. As of now I currently have 5 DAA BFD and 2 DAA 2in1 crimp/seater. These BF dies are
by far hands down the best bullet feeding dies on the market. Absolutely no issue whatsoever and for those with my same wonders "YES" they even work with cast, cast w/lube in ring, powder coated, powder coated with gas check, plated, jacketed it just does not matter these work and work great. I would not use Alox type lubed bullets because I feel in short time the lube will gum up the die or bullet tubes.
Mike
Monday 07 January, 2019
I got the product fast and it has worked great a few little hick-ups but worked them out very high priced for what you get i think that is my biggest complaint about these products will suffer thru some of the other issues with the hornadys before i spend this kinda of money again. The product is good it works but just to much money for what you get .
James B***n
Wednesday 26 December, 2018
buon giorno ho acquistato da voi un bullet feeder è arrivato nei tempi previsti e corrisponde esattamente alle informazioni di base . sono completamente soddisfatto dell'acquisto . grazie per la vostra professionalita e serieta'.pietro angelo giacomelli.
pietro angelo g***i
Tuesday 04 December, 2018
Was looking for a bullet feeder for 9mm to use on my recent purchase a hornady lock n load. I did my homework and found that this product was the way to go. I am using it with the Lee multi tubes. I used a 3/8” cpvc fitting softened with a heat gun to marry the two together. It works perfectly. Very satisfied and will buy another for 40 s&w
Richard M***l
Tuesday 04 December, 2018
Was looking for a bullet feeder for 9mm to use on my recent purchase a hornady lock n load. I did my homework and found that this product was the way to go. I am using it with the Lee multi tubes. I used a 3/8” cpvc fitting softened with a heat gun to marry the two together. It works perfectly. Very satisfied and will buy another for 40 s&w
Richard M***l
Tuesday 04 September, 2018
Excelent product, fasts delivery, good technial help, I messed something up , ( my bad) supperieor to other products.
jim C***Z
Sunday 26 August, 2018
I read all the reviews for different brands and went with Mr Bullet feeder. I've not been disappointed. Work great!
Randy
Tuesday 07 August, 2018
Like many others, I bought this after becoming frustrated with the Hornady bullet feeder die + tubes. I've only got ~700 rounds through the DAA bullet feeder, but so far, I'm impressed. It was much easier to set up and tune than the Hornady, and the design seems much less prone to failure. For those who have the Hornady already, I've found that the DAA bullet feeder works just fine with the Hornady PTX, so you can get away with buying just the DAA die and bullet magazine(s) and you'll be set. The only reason I'm not giving this product 4 stars is that if you're starting from nothing, it's roughly 3x as expensive as the Hornady. The die design is simpler, so I'm not sure why it's more expensive. The magazines, on the other hand, are easily worth the added price over the Hornady tubes.
Andrew
Tuesday 17 July, 2018
These bullet feed dies are the best available , I have 9mm, 40S&W, 45ACP and they all work great with no problems
Brady B***s
Monday 02 July, 2018
I have them for 9mm and 45acp. They work perfectly once mounted on the press... but that is the issue. It seems the die threads “bell out” slightly near the beginning making it so tight you cannot easily screw them into place. I had to get a 7/8” thread die to chase the threads. Worked great after that. Little disappointed that it had to be done but the results are worth it. No comparison don’t waste your money on the Hornady die.
Jim T***o
Friday 29 June, 2018
The die assembly arrived quickly. Setup was easy on my Lee Loadmaster. I use poly-coated lead bullets for reloading and this die feeds them without issue. A couple of notes. 1. If you take the die assembly apart there are 3 small BB's inside that will come out easily as the only thing holding them in is the die body. 2. If you have any bullets left in the die, run the ram up, and it depresses the plunger, the next bullet will fall out onto the shell plate. These two things are not a default of the die but an operational thing to be aware of.
Timothy
Sunday 03 June, 2018
The bullet feeder works well and is easy to set up. The only complaint I have is that the die body was tighter than I expected to screw into the toolhead (I have no issue with any other die). I expected to screw it down finger tight but I couldn't screw it down without a little help from a pair of channel locks. I used a rag between the die and the channel locks to keep from damaging the die.
Robert
Thursday 31 May, 2018
This is by far the BEST bullet feeder I have ever used. I tried LEE, RCBS and Hornady and yes they work but you have to keep on top of them. With Mr Bullet Feeder, you set it and go. I have used it on jacket bullets and lead lubed bullets and powder coated bullets both in 9mm and .38 cal. It works great.
Charles F***r
Monday 07 May, 2018
I got this die for my Hornady LNL AP after reading other reviews about how simple to use and reliable. Believe me, those reviews are all "spot-on". Had this up and running in no time. Once set for your case, nothing more to worry about. One thing of note, I could not thread the Hornady steel sure-lock lock rings onto the aluminum body of the die freely. Had to use the lock-nut provided. Other than that, am very pleased with this purchase.
Michael M***e
Wednesday 25 April, 2018
I have loaded thousands of rounds with my past die, which was a Hornady. It caused me so many problems due to loading cast bullets. The Mr. Bulletfeeder die doesn't have any of those issues! I wish I had tried this die sooner! With this dies it doesn't matter if you're loading FMJ, or coated bullets, it just works!
Michael L***n