In stock
$469.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase. Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it. To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process. Reward Points cannot be transferred to another user and have no expiration date. They are available to you for any future purchase on the DAA webshop.
Choose options
We Also Recommend
$22.95
$149.95

Latest reviews

Tuesday 18 February, 2020
I thought I should point out that I solved the MBF with the powder cop on the Dillon XL750. I had an old RCBS uniflow powder drop and I had an RCBS Case activated system to work the uniflow. I put it together, put the powder cop in statrion 3 and the MBF in station 4 and there you go. Works like...
Rating: (5 of 5 Stars!)
Monday 30 December, 2019
Received complete order promptly with no issues. Installation was simple and straight forward. Very happy with the ease and production improvement. Should have mad the move sooner.
Rating: (5 of 5 Stars!)
Saturday 21 December, 2019
I shoulda bought one years ago - the reloading flow is assume!
Rating: (5 of 5 Stars!)
Friday 20 December, 2019
Mr. Bulletfeeder provides a real confort for reloading. I am very satisfied with my purchase.
Rating: (5 of 5 Stars!)
Monday 16 December, 2019
There's one thing which usually isn't mentioned in these reviews. The fact that the bullet feeder makes reloading safer by freeing up your attention to look at what's going on in all the stations instead of having your focus monopolized by putting the small bullet into the small hole in your case...
Rating: (5 of 5 Stars!)
Tuesday 23 July, 2019
Wish I bought this earlier, works fantastically! I was afraid that the bullets would not be seated firmly enough for the shell-late to rotate without the bullets staying seated but it works beautifully thanks to the custom expander that is included in the package.
Rating: (5 of 5 Stars!)
Friday 12 July, 2019
Love mine. Speeds up reloading process a lot and helps with powder spill on my 9 major loads. Once in awhile you get a flipped bullet but so far it’s been quite reliable. Setup does take a little bit of time but after it’s done you’ll be happy you bought one
Rating: (5 of 5 Stars!)
Wednesday 08 May, 2019
Great product! well made and reliable. A great choice for the money, absolutely satisfied!
Rating: (5 of 5 Stars!)
Tuesday 19 March, 2019
As I load a good 20k 45 a year, I really wanted to like it. Tried to get it to work for over a year. Was back and forth with customer service dozens of times, but regardless of what they say, this just does not work with a lot of lswc profile bullets. I, and a number of other bullseye shooters I...
Rating: (1 of 5 Stars!)
Monday 11 February, 2019
Struggling with the powder funnel/case opener provided. It was quite rough and causes the machine to shake when pulling it out of the case. I honed it with 1200grit paper and it got better but still sticky causing powder to spill. Will just have to load a couple of thousand and see if it gets...
Rating: (3 of 5 Stars!)
Saturday 20 October, 2018
Mr BulletFeeder is GREAT! I just recently added another Dillon 1050 to my bench, and I have Mr. BulletFeeder on my other pistol setups so I had already planned to do the same to the new loader. Really does a great job, and allows me to concentrate on other functions rather than place individual...
Rating: (5 of 5 Stars!)
Sunday 07 October, 2018
A great invention. Took about a little over a hour to set up, and adjust. Save a lot of time when reloading.
Rating: (5 of 5 Stars!)
Friday 14 September, 2018
I added the Mr. Bulletfeeder to my Super 1050 and it has made reloading fun. I reload 223 ammo and being someone with big fingers, trying to place the small bullets onto the case was very aggravating. The Mr. Bulletfeeeder has resolved that issue and reloading is now fun and very fast. Thank...
Rating: (5 of 5 Stars!)
Thursday 09 August, 2018
Have a Dillon 650 and wanted to keep the powder check station so I bought the DAA 9mm crimp/seater die. I only taper crimp which the die did well, Once set up no problems at all, happy with the purchase.
Rating: (5 of 5 Stars!)
Monday 07 May, 2018
I OWN TWO DILLON 650'S ONE FOR 9MM AND ONE FOR 45ACP. I PURCHASED THE MR. BULLET FEEDER FOR THE NEW 45 PRESS AND I MUST SAY IT IS THE GREATEST THING SINCE SLICED BREAD. I HAVE ANOTHER BRAND BULLET FEEDER ON THE 9MM PRESS WHICH DOES NOT PERFORM ANYWHERE NEAR THE MR. BULLET FEEDER. I MAY SOON BE...
Rating: (5 of 5 Stars!)
Wednesday 11 April, 2018
Great Product for Dillon 650. Looks better than the one I bought for a 1050 before DAA took over. Bullets hang up occasionally so I may need to bevel\polish the lower part of the feed tube. I wouldn't want to run a press without a bullet feeder - everthing just runs smoother and fast with it.
Rating: (5 of 5 Stars!)
Friday 06 April, 2018
I bought a Mr BulletFeeder for my XL 650, to load 9mm for USPSA shooting. Once you finish fine tuning everything, it's an awesome addition. With the bullet feeder, my reloading has been considerably sped up. 10/10 would buy again. Make sure to read the directions, and take your time to get...
Rating: (5 of 5 Stars!)
Wednesday 27 December, 2017
perfect gift to my self :-) easy to install and good youtube clips when trobleshooting/install Wonder why i did not buy it when i bought my 650. Worth the money :-)
Rating: (5 of 5 Stars!)
Saturday 07 October, 2017
Great Product. Easy to install and really met all my expectations. Wish I would have purchased years ago. The videos you have posted are excellent. Thank you.
Rating: (5 of 5 Stars!)
Friday 28 April, 2017
I purchased the Mr.Bullet in 9mm directly from DAA and it worked so well I've purchased conversions in .40 S&W and .45acp. Extremely easy to set up and saves valuable time that I use for more shooting. I highly recommend the DAA Mr. Bullet bullet feeder.
Rating: (5 of 5 Stars!)

Mr. Bulletfeeder by Double-Alpha - Pistol and Rifle Calibers

(59)
Manufacturers: Double-Alpha Academy

Description:

Please note:

The current design of the new XL750 does not allow the bullet dropper to be positioned in station #4 of the toolhead because of the angle at which the powder Dispenser bar extends directly towards it. This means the bullet dropper MUST be positioned immediately after the powder dropper, in station #3. That makes it impossible to use a Powder-Check AND a bullet dropper at the same time.

We will attempt to come up with a solution to allow the powder dropper to be rotated to another angle to resolve this issue, but at the moment, be aware of this issue.

DAA has been the proud European distributor of Mr. Bullet Feeder since 2006.  It makes one wonder how they ever reloaded without one...  Those who reload a lot, quickly appreciate the efficiency and reliability of this ingenious Patented system.

However, Mr. Bullet Feeder was always been a little “rough” in its appearance and finish.  It was made from existing materials and parts, and as such never had the sleek professional look and feel of a refined “production” article.  Additionally since the bullet feeders have always been hand made, in moderate quantities, production costs have been high, resulting in demand, which always exceeded availability.

Now, all this has changed! DAA proudly introduced the DAA Mr. Bullet Feeder in 2012.  DAA and Rak Systems teamed up in retooling and redesigning the Mr. Bullet Feeder, with fantastic results.  The  Mr. Bullet Feeder by DAA, manufactured by Double-Alpha Academy under license by Rak Systems, is a professional, hi-tech version of the original.  It is lighter in weight and more compact than the previous models.  This new streamlined product is easier to install and set up, while retaining the same flawless performance and efficiency of the original design.

In fact, an entirely new US Patent Pending dropper system allows this new model to function even better and longer than before. The new dropper design eliminates the need for any spring or small plastic parts in the dropper head, and allows it to function entirely by gravity and an ingenious geometric design.

Finally to top it all off - DAA offers the DAA Mr. Bullet Feeder at a far more affordable price!

If you have never tried a bullet feeder on your progressive reloader – don’t wait any longer!  It will cut the time and effort involved in reloading practically in half!  A must-have item for any serious shooter.

The new Mr. Bullet Feederby DAA is available in 9/38, 40SW/10 mm, .45, and in rifle calibers .223, .308, and 6.5x55mm. (See rifle calibers under other listing).

 

Click here for user instructions for this and other products.

Reviews (59)

Tuesday 18 February, 2020
I thought I should point out that I solved the MBF with the powder cop on the Dillon XL750. I had an old RCBS uniflow powder drop and I had an RCBS Case activated system to work the uniflow. I put it together, put the powder cop in statrion 3 and the MBF in station 4 and there you go. Works like a charm.
Monday 30 December, 2019
Received complete order promptly with no issues. Installation was simple and straight forward. Very happy with the ease and production improvement. Should have mad the move sooner.
Saturday 21 December, 2019
I shoulda bought one years ago - the reloading flow is assume!
Friday 20 December, 2019
Mr. Bulletfeeder provides a real confort for reloading. I am very satisfied with my purchase.
Monday 16 December, 2019
There's one thing which usually isn't mentioned in these reviews. The fact that the bullet feeder makes reloading safer by freeing up your attention to look at what's going on in all the stations instead of having your focus monopolized by putting the small bullet into the small hole in your case so you can pull the handle again. The quality of my ammo has improved since I started using the bullet feeder.
Tuesday 23 July, 2019
Wish I bought this earlier, works fantastically! I was afraid that the bullets would not be seated firmly enough for the shell-late to rotate without the bullets staying seated but it works beautifully thanks to the custom expander that is included in the package.
Friday 12 July, 2019
Love mine. Speeds up reloading process a lot and helps with powder spill on my 9 major loads. Once in awhile you get a flipped bullet but so far it’s been quite reliable. Setup does take a little bit of time but after it’s done you’ll be happy you bought one
Wednesday 08 May, 2019
Great product! well made and reliable. A great choice for the money, absolutely satisfied!
Tuesday 19 March, 2019
As I load a good 20k 45 a year, I really wanted to like it. Tried to get it to work for over a year. Was back and forth with customer service dozens of times, but regardless of what they say, this just does not work with a lot of lswc profile bullets. I, and a number of other bullseye shooters I have spoken with, have never been able to get it to work even though I was assured it would work before ordering it. I was forced to sell it. In the end I lost over 100$ and a ton of time on this. Not happy.
Monday 11 February, 2019
Struggling with the powder funnel/case opener provided. It was quite rough and causes the machine to shake when pulling it out of the case. I honed it with 1200grit paper and it got better but still sticky causing powder to spill. Will just have to load a couple of thousand and see if it gets smoother.
Saturday 20 October, 2018
Mr BulletFeeder is GREAT! I just recently added another Dillon 1050 to my bench, and I have Mr. BulletFeeder on my other pistol setups so I had already planned to do the same to the new loader. Really does a great job, and allows me to concentrate on other functions rather than place individual bullets. Therefore, I believe that while the bullet feeder is not a total necessity, it certainly helps me to make more consistent ammo with less issues during a reloading session. And, the MR BF certainly speeds up the operation by a sizeable margin. Nice work DAA and MR BF! Keep it up.
Sunday 07 October, 2018
A great invention. Took about a little over a hour to set up, and adjust. Save a lot of time when reloading.
Friday 14 September, 2018
I added the Mr. Bulletfeeder to my Super 1050 and it has made reloading fun. I reload 223 ammo and being someone with big fingers, trying to place the small bullets onto the case was very aggravating. The Mr. Bulletfeeeder has resolved that issue and reloading is now fun and very fast. Thank you for such an outstanding product! Greg Soileau
Thursday 09 August, 2018
Have a Dillon 650 and wanted to keep the powder check station so I bought the DAA 9mm crimp/seater die. I only taper crimp which the die did well, Once set up no problems at all, happy with the purchase.
Monday 07 May, 2018
I OWN TWO DILLON 650'S ONE FOR 9MM AND ONE FOR 45ACP. I PURCHASED THE MR. BULLET FEEDER FOR THE NEW 45 PRESS AND I MUST SAY IT IS THE GREATEST THING SINCE SLICED BREAD. I HAVE ANOTHER BRAND BULLET FEEDER ON THE 9MM PRESS WHICH DOES NOT PERFORM ANYWHERE NEAR THE MR. BULLET FEEDER. I MAY SOON BE REPLACING THE 9MM BULLET FEEDER WITH A NEW MR. BULLET FEEDER AND JUST JUNKING THE OTHER UNIT.
Wednesday 11 April, 2018
Great Product for Dillon 650. Looks better than the one I bought for a 1050 before DAA took over. Bullets hang up occasionally so I may need to bevel\polish the lower part of the feed tube. I wouldn't want to run a press without a bullet feeder - everthing just runs smoother and fast with it.
Friday 06 April, 2018
I bought a Mr BulletFeeder for my XL 650, to load 9mm for USPSA shooting. Once you finish fine tuning everything, it's an awesome addition. With the bullet feeder, my reloading has been considerably sped up. 10/10 would buy again. Make sure to read the directions, and take your time to get everything adjusted. Be prepared to fine tune it a bit.
Wednesday 27 December, 2017
perfect gift to my self :-) easy to install and good youtube clips when trobleshooting/install Wonder why i did not buy it when i bought my 650. Worth the money :-)
Saturday 07 October, 2017
Great Product. Easy to install and really met all my expectations. Wish I would have purchased years ago. The videos you have posted are excellent. Thank you.
Friday 28 April, 2017
I purchased the Mr.Bullet in 9mm directly from DAA and it worked so well I've purchased conversions in .40 S&W and .45acp. Extremely easy to set up and saves valuable time that I use for more shooting. I highly recommend the DAA Mr. Bullet bullet feeder.
Setup

Q: Is it necessary to use the powder funnel/expander that came with the system?

We recommend installing the new powder funnel/expander (for handgun calibers) on your press. It has been machined with a modified profile...

Adjustment

Q: When mounting the collator, what is the best angle to use?

For the majority of bullet types, a collator plate angle of 45 degrees will provide excellent results. When the surface of the plate is set to and angle of 45...

Rifle Caliber

Rifle 6.5x55mm video tutorials

65mm wire - click here

Nose guide - click here

.223 Dropper - click here

Colator - click here

 

223/5.56 Setup Information

Collator

Troubleshooting

Q: I installed my Bulletfeeder 7 months ago and have been very pleased with it. The last time I used it was about three weeks ago and when I turned it on just now nothing happened. No motor noise at all. I checked all the fittings and...

General questions

Q: I would like to use a mr bullet feeder for 9mm and 223 on my Dillon 650. Do I need to buy two separate units (one for pistol and one for rifle) or can I use one unit and a conversion kit?

All you need is a Mr.BF...

Also Available In Set(s)

You may also be interested in