In stock
$138.85
Choose options
We Also Recommend
$54.95

Latest reviews

Thursday 01 September, 2016
It took 30 minutes or less to setup and use, and work very very well. I have a Dillon 650xl and am new to reloading but the mini Mr.Bulletfeeder was a snap to setup and use. Thanks for a great and reasonable priced product!
Rating: (5 of 5 Stars!)
Monday 29 August, 2016
I finally got my reloading table back together and my Hornady LNL Press up and running. The Mini Mr.Bulletfeeder is a great addition to the press, it saves a lot time. Most of my reloading is for Cowboy Action Shooting so the I use cast lead bullets with a lube and the Mini Mr. Bulletfeeder works...
Rating: (5 of 5 Stars!)
Tuesday 24 May, 2016
EXCELLENT ITEM I\'M VERY SATISFIED.
Rating: (5 of 5 Stars!)
Tuesday 29 March, 2016
Excellent product! Easy to install and use. I personally don't mind filling the tubes before a reloading session. It does take some time yes.. but I find it better spend before then during reloading. I use a Dillon 550 and I have a better flow in checking the powder charge and indexing the...
Rating: (5 of 5 Stars!)
Tuesday 15 March, 2016
Terrific product. Had a couple of questions regarding installation and DAA customer service was outstanding. They responded immediately and resolved my issues.
Rating: (5 of 5 Stars!)
Saturday 20 February, 2016
One of the best reloading products I've ever bought. I only wish I would have bought it earlier. I will be purchasing bullet feeders in 223 and 9mm soon.
Rating: (5 of 5 Stars!)
Monday 01 February, 2016
Excellent produit, transaction parfaite, livraison rapide, simple et efficace !
Rating: (5 of 5 Stars!)
Wednesday 20 January, 2016
The mini Mr. bullet feeder has got to be the best addition for the progressive reloader without spending a lot of cash. I bought the 9mm with 2 additional magazines and loved it so much I bought another for .223
Rating: (5 of 5 Stars!)
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
Rating: (5 of 5 Stars!)
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
Rating: (5 of 5 Stars!)
Monday 09 February, 2015
I have to say that the mr bullet feeder has been one of the best things that I have bought recently works as promised no mucking about.......excellent
Rating: (5 of 5 Stars!)
Wednesday 10 December, 2014
Veramente ottimo, il sistema a sfere è semplicissimo e l'installazione richiede solo 10 minuti.
Rating: (5 of 5 Stars!)
Tuesday 02 December, 2014
I've now loaded about a thousand rounds of .38 special and 9mm combined, with both lead and jacketed bullets. The machine I'm using is the Hornady Lock-n-Load progressive, First let me say that I'm very happy with the Mr. Mini it has made the job so much easier, the projectiles get a light tap...
Rating: (5 of 5 Stars!)
Friday 01 August, 2014
Ottimo per semplicità di installazione e funzionamento. Buono il rapporto qualità / prezzo.
Rating: (5 of 5 Stars!)
Wednesday 23 July, 2014
Sehr geniales Geschossmagazin zum setzen der Geschosse in meiner Dillon XL 650
Rating: (5 of 5 Stars!)
Friday 11 April, 2014
A real simple thing to use ! Everything is faster now. Works on a Lee turret press too as well as on a Load Master. No room enough on a Lee Pro 1000, though.
Rating: (5 of 5 Stars!)
Monday 24 March, 2014
Perfecto, da gusto no tener que poner las puntas a mano!
Rating: (5 of 5 Stars!)
Saturday 15 March, 2014
Works great! I'm loading .40 S&W on a Lee Load-Master using this bullet-feeder and it has been functioning flawlessly. Just don't try to lift the feed tubes off the die while it's still full of bullets, you'll spill them everywhere!
Rating: (5 of 5 Stars!)
Saturday 01 February, 2014
SAUL....IT WORKS GREAT!!!! I AM USING IT ON THE DILLION RL 1050,LOADING 9mm,40 SW AND SIG 357. WITH THE TUBES PRELOADED I CUT LOADING TIME IN NEARLY 1/2. IN ADDITION ,THE OAL OF THE ROUNDS HAS FLATTED OUT TO BE WITHIN +/_.001".I FEEL THE PRIMARY CAUSE OF THIS IMPROVED OAL READING IS BECAUSE OF...
Rating: (5 of 5 Stars!)
Sunday 19 January, 2014
super++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Rating: (5 of 5 Stars!)

DAA Mini Mr. Bulletfeeder - Pistol

(63)
Manufacturers: Double-Alpha Academy

Description:

Please note:

The current design of the new XL750 does not allow the bullet dropper to be positioned in station #4 of the toolhead because of the angle at which the powder Dispenser bar extends directly towards it. This means the bullet dropper MUST be positioned immediately after the powder dropper, in station #3. That makes it impossible to use a Powder-Check AND a bullet dropper at the same time.

We will attempt to come up with a solution to allow the powder dropper to be rotated to another angle to resolve this issue, but at the moment, be aware of this issue.

Based on the success of the Mr. Bullet Feeder by DAA, DAA has now launched a new more economical version of the original Mr. Bullet Feeder.  The new Mini Mr. Bullet Feeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same reliable dropper die assembly as used on the Mr.Bulletfeeder by DAA.

Each magazine of bullet tubes needs to be manually filled by hand before reloading begins, similar to the way a primer tube is filled before starting the reloading process. After a little practice, it will take approximately 2 minutes to fill the tube assembly. This can be done in advance of the reloading process to save time.  Additional tube assemblies can be purchases separately (or as a bundle), thus allowing you to pre-load 300, 400 or more bullets before starting a reloading session.

While reloading, the bullets will drop down in the transparent tube, as they feed into the dropper-die assembly. Once a tube is empty, you simply rotate and click the next tube into place and keep reloading. Transition to the next tube takes just a second or two. Once the entire 6-tube magazine is empty, either reload it by hand, or drop your 2nd assembly into place to continue reloading without delay.

The Mini Mr.Bulletfeeder by DAA can be used on any progressive reloading machine which uses the same size dies as Dillon, however please note that the powder funnel supplied with the Mini Mr.Bulletfeeder by DAA is designed to be used ONLY in the Dillon powder drop! If you wish to use the Mini Mr.Bulletfeeder by DAA with another press, you may need to purchase elsewhere another powder funnel to expand the brass.

NOTE: That the bullet feeder does require a station on the tool head, direcly after the powder dropper.

DAA has found it is difficult to use the Mini Mr.Bulletfeeder on a 1050 when a powder check is being used in the following station. This has to be with the angle in which the powder dropper sits, forcing the bullet dropper to rotate further away, over the next station. This is an issue only on a 1050

The Mini Mr. Bulletfeeder includes:

1 x 6-Tube Bullet Magazine Assembly
1 x Dropper Die Assembly
1 x Expanding powder funnel (Dillon compatible)
3 x Spare Steel Ball-Bearings for Dropper
1 x User Instruction Sheet

Please note: Mr.Bullet feeders and Mini Mr.BF are usually shipped with our Dillon Powder funnel. If you wish us to swap that out for a Hornady funnel when shipping – we can do so for you- NOTE that the 9mm Hornady funnel is out of stock.. request that at time of ordering. Or, separately purchase your Hornday expanding powder funnel here

Click here for user instructions for this and other products.

Reviews (63)

Thursday 01 September, 2016
It took 30 minutes or less to setup and use, and work very very well. I have a Dillon 650xl and am new to reloading but the mini Mr.Bulletfeeder was a snap to setup and use. Thanks for a great and reasonable priced product!
Monday 29 August, 2016
I finally got my reloading table back together and my Hornady LNL Press up and running. The Mini Mr.Bulletfeeder is a great addition to the press, it saves a lot time. Most of my reloading is for Cowboy Action Shooting so the I use cast lead bullets with a lube and the Mini Mr. Bulletfeeder works great.
Tuesday 24 May, 2016
EXCELLENT ITEM I\'M VERY SATISFIED.
Tuesday 29 March, 2016
Excellent product! Easy to install and use. I personally don't mind filling the tubes before a reloading session. It does take some time yes.. but I find it better spend before then during reloading. I use a Dillon 550 and I have a better flow in checking the powder charge and indexing the plate. I load up three sets of tubes and three sets of primer tubes for a session. That's perfect for a reloading session for me.
Tuesday 15 March, 2016
Terrific product. Had a couple of questions regarding installation and DAA customer service was outstanding. They responded immediately and resolved my issues.
Saturday 20 February, 2016
One of the best reloading products I've ever bought. I only wish I would have bought it earlier. I will be purchasing bullet feeders in 223 and 9mm soon.
Monday 01 February, 2016
Excellent produit, transaction parfaite, livraison rapide, simple et efficace !
Wednesday 20 January, 2016
The mini Mr. bullet feeder has got to be the best addition for the progressive reloader without spending a lot of cash. I bought the 9mm with 2 additional magazines and loved it so much I bought another for .223
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
Monday 09 February, 2015
I have to say that the mr bullet feeder has been one of the best things that I have bought recently works as promised no mucking about.......excellent
Wednesday 10 December, 2014
Veramente ottimo, il sistema a sfere è semplicissimo e l'installazione richiede solo 10 minuti.
Tuesday 02 December, 2014
I've now loaded about a thousand rounds of .38 special and 9mm combined, with both lead and jacketed bullets. The machine I'm using is the Hornady Lock-n-Load progressive, First let me say that I'm very happy with the Mr. Mini it has made the job so much easier, the projectiles get a light tap into the case and are perfectly straight so there is no problem with them shaking out between stages. The Mr. Mini came with a powder through case expander witch is beautifully finished and specially designed to provide exactly the right amount and shape of expansion for the bullets to sit in, I wish that I could use it but unfortunately it is made to fit a Dillon powder thrower, if they ever come out with one to fit the Hornady I will certainly get it. The Mr. Mini can be improved, 1) it could do with a micro switch beeper to let you know that it's time to rotate to the next tube, this should be an optional extra for those that can afford it, and 2) on a couple of occasions when there was just 4 or 5 bullets to go the body of the feeder got stuck on the up stroke and released all the remaining bullets at once, I'm dealing with this by placing a small lead weight on top of the unit to keep it heavy enough to always slide down like it should. Overall I would and in fact have recommended this bullet feeder to my friends.
Friday 01 August, 2014
Ottimo per semplicità di installazione e funzionamento. Buono il rapporto qualità / prezzo.
Wednesday 23 July, 2014
Sehr geniales Geschossmagazin zum setzen der Geschosse in meiner Dillon XL 650
Friday 11 April, 2014
A real simple thing to use ! Everything is faster now. Works on a Lee turret press too as well as on a Load Master. No room enough on a Lee Pro 1000, though.
Monday 24 March, 2014
Perfecto, da gusto no tener que poner las puntas a mano!
Saturday 15 March, 2014
Works great! I'm loading .40 S&W on a Lee Load-Master using this bullet-feeder and it has been functioning flawlessly. Just don't try to lift the feed tubes off the die while it's still full of bullets, you'll spill them everywhere!
Saturday 01 February, 2014
SAUL....IT WORKS GREAT!!!! I AM USING IT ON THE DILLION RL 1050,LOADING 9mm,40 SW AND SIG 357. WITH THE TUBES PRELOADED I CUT LOADING TIME IN NEARLY 1/2. IN ADDITION ,THE OAL OF THE ROUNDS HAS FLATTED OUT TO BE WITHIN +/_.001".I FEEL THE PRIMARY CAUSE OF THIS IMPROVED OAL READING IS BECAUSE OF THE COMBINATION OF THE POWDER EXPANDER AND THE BULLET DROPPER. THANKS LARRY 1/31/2014
Sunday 19 January, 2014
super++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
General questions

Q: Will the mini Mr. Bullet Feeder work with lead cast, polymer coated bullets? Specifically .40 cal. (.401 diameter)?

Yes, as long as they are not full wadcutters.

Q: I would like to know if your mini...

Also Available In Set(s)

You may also be interested in