Mini Mr.Bulletfeeder to Full Mr.Bulletfeeder Upgrade Kit

After replacing my Dillon 550B with case feeder with a Dillon 750 with case feeder I knew it was time to buy the Mt.Bulletfeeder upgrade Kit. In my review of the Mini Mr.bulletfeeder I mentioned that I had to resort to a "Mickey Mouse" work around to get it to "mostly" feed reliably via a follower rod. Now, with the Collator automatically keeping a fresh supply of bullets to the dropper die the bullet stack remains constant making the die height adjustment a simple one time operation. I can now reliably feed a random mix of powder coated 44-40 bullets that have different lube groove profiles. Installation was pretty easy with some tinkering of the adjustments of both the nose guide ledge and the mounting angle of the collator. What worked on the bench was not what worked once mounted on the 750's case feeder. Now loading is almost as much fun and shooting and for the first time in my life I can now reload faster than I can shoot the stuff up!!! For someone who learned how to reload on a Lyman Jr press back in the early 1960's this setup is really a whole new world.

The nose down adapter works great. Wish I bough this sooner

This unit works ok. The instructions that came with it could be WAY more helpful. It doesn't mention where or which direction to mount it, how the spring needs to be positioned or tensioned, or what is causing bullets to fall in the spring tube upside down. (I didn't think this would ever happen). I guess I'll figure it out sooner or later.

Love this piece of kit. I upgraded my mini Mr Bulletfeeder and saved some money. Easy to follow set-up instructions.

This has made my reloading fun. I installed it on my Dillon RL1100. This is way more reloader then I need, but once set-up with the bullet feeder it really is fun to reload again. Just load up the hoppers and go. It did take me some time to get the "spring" length just right. When I order the conversion kit I will probably go with the Pro dropper. That would have made my initial set-up much easier. DAA really has wonderful products.

Eine sehr gute Investition, denn nur mit der Geschoss-Setzmatrize ist man immer nur darauf bedacht beim Füllen nachzukommen. Denn hat man einen Casefeeder so ist der Bulletfeeder ein Muss . Leichte Montage und alles läuft perfekt ob RN- oder KS-Geschosse !

Very easy to assemble and set up since I had the dropper die already.
I'm using RN 124gr 9mm and I just removed one of the smallest nose plates and adjusted the nose guide a tiny bit. Ran perfectly at 45 deg.
Comes with the large lead spring so had to cut that down a bit for my XL650.
One thing I would like as an improvement would be a quick disconnect for the dropper assembly in order to quickly take the unit off for storage or caliber change. For now I just loosen the set screw at the brass base for the perspex tube and disconnect the cable for the power supply. Then the whole unit can be put away, wires and all.

This upgrade was the easy to assemble. I would recommend this this to everyone.

Works like a charm, I'll purchase another one for larger powder charges.

So much better than the Mini tube version. I got so sick of loading those tubes that I broke down and bought this. Easy to setup and adjust for various grains, love it so far.

Reliable operation. Nice to have a bullet feeder that rotates a bullet that is in the wrong orientation to the right orientation rather than rejecting it back to the hopper.

Love it! It is a little better than the Mini Mr.Bullet feeder, not much but some. I don't have to load the tubes or remember to turn them. So I guess it's a keeper.

This was a great deal! I was able to take my 9mm and upgrade it to the full kit while saving a bit of money since I already had the dropper die. The full kit is even better than expected! Plus I can always buy another dropper die to use the canister portion on another loader.