In stock
$69.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options
We Also Recommend
$39.95
$33.95

Latest reviews

Friday 30 September, 2022
Can be very sensitive with certain powders. Constantly adjusting it. Hoping DAA will allow me to return it, as it didn't work for me.
DAA has a lot of great ideas, and I've purchased many of them over the years.
Rating: (3 of 5 Stars!)
Tuesday 13 September, 2022
I originally purchased a Dillion powder check for my 9mm 1050 toolhead;

https://www.amazon.com/Dillon-Precision-Powder-Check-System/dp/B00XM3GBYG

I replaced it with the DAA Magnetic Powder Check and bought additional powder checks for my 45 ACP and 5.56 toolheads. The DAA Powder Check is a...
Rating: (5 of 5 Stars!)
Wednesday 07 September, 2022
This powder checker is fabulous! I never really had confidence in the other powder checkers I had this one has the alarm, LED light signal and is super sensitive and easy to set. It is totally changed my reloading game!
Rating: (5 of 5 Stars!)
Monday 29 August, 2022
Works great if Im using a specific brand of brass. Dial it in for Winchester brass, and it chugs right along with no problem. If you collect range brass as I do, you cant run hodge-podge brass through it. Differences in head space from brand to brand will set off the alarm.
Rating: (4 of 5 Stars!)
Tuesday 21 June, 2022
Works great but I can’t use it because the two in one die did not work for me ?
Rating: (5 of 5 Stars!)
Friday 10 June, 2022
This is much better than original unit. More accurate, and I have confidence in it. I taped on a visual indicator (paper arrow) so that if I hit a limit slightly, I can tell if it is high or low limit. Made initial adjustment and haven't had to reset yet.
Rating: (5 of 5 Stars!)
Sunday 05 June, 2022
I have bought a lot of products from DA and have always 110% satisfied with everything. Their support system is beyond expectations and they have just about everything I want BUT a lot I can't afford.
Rating: (5 of 5 Stars!)
Thursday 02 June, 2022
Very happy with this powder monitor. Works as advertised, easy to set up. Currently installed on my Hornady progressive, plan to purchase another for my Dillon.
Rating: (5 of 5 Stars!)
Wednesday 20 April, 2022
I would not recommend this product. I am using it in 45 ACP with a spherical powder (MP190) and it beeps at me about 4 out of every 5 rounds, no matter how many times I try to reset it. I was stopping production to weigh charges but they were always + or - 3 tenths of a grain of what I was going...
Rating: (1 of 5 Stars!)
Monday 21 March, 2022
Works great! Easy to install and set up and the visual indicator is very helpful
Rating: (5 of 5 Stars!)
Saturday 26 February, 2022
Easy to set up , works great . Need to pick up a few more for my other tool heads .
Rating: (5 of 5 Stars!)
Wednesday 09 February, 2022
Great, but gives false alerts every 20 or so rounds. I used to remove the case to check powder (always good), but now I just rotate the magnet a little and the alarm goes off. Have adjusted and readjusted, still can't get this to stop. Overall, very good tool.
Rating: (4 of 5 Stars!)
Monday 07 February, 2022
Only four stars from me because I found one drawback in this otherwise perfect product. When checking 9mm pistol loads, the "piston" on the measuring rod causes an air "overpressure", forcing several granules of powder out of the case. And thus, creating a powder spill (and lowering the load...
Rating: (4 of 5 Stars!)
Tuesday 01 February, 2022
Very nice and only alerts when a case is present. A cheap investment to avoid an incorrect charge.
Rating: (5 of 5 Stars!)
Wednesday 29 December, 2021
I have several of these and they all work perfectly.
Rating: (5 of 5 Stars!)
Tuesday 28 December, 2021
These are great when setup properly. I have one setup on all my tool heads for each caliber I reload.
Rating: (5 of 5 Stars!)
Monday 27 December, 2021
This powder check works OK. Nice that it has both an audio and a visual warning. My experience was that it was more "finicky" to set up and adjust the alarm levels than the Dillon powder check. Perhaps it was me. I was using it on an XL650 for 9mm.
Rating: (4 of 5 Stars!)
Sunday 12 December, 2021
Second one I purchased for my other Dillon Quick Change. Simple to install AND it has saved several no powder and 1 double load in my 147 9mm. $65 buck well spent!!!
Rating: (5 of 5 Stars!)
Thursday 04 November, 2021
Exceeded my expectations. Pretty simple to set up, and with a little care and attention during set up and change over I'm able to get consistent results.

Audible and visual alarms provide dual sensory inputs, and for me, a valuable addition to my reloading process.
Rating: (5 of 5 Stars!)
Wednesday 03 November, 2021
Once adjusted is very good. Difficult but not impossible to adjust. The problem is when the correct amount of powder is in the case, it is difficult to hold the stem still while getting magnet at just the right height and then tighten the allen key. Then run the press and it will beep when the...
Rating: (4 of 5 Stars!)

DAA Magnetic Powder Check 2.0

(117)
Manufacturers: Double-Alpha Academy
DILLON XL750 NOTE
The Dillon XL750 Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. As a solution to this issue we are pleased to offer our  Extra-Short Dillon Powder Bar. (sold separately)

Description:

The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo.

The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.

In the new 2.0 design, the Sensitivity Adjustability feature has been removed, in favor of placing the Reed sensor in a fixed position on a custom built PCB board. That fixed position is one that sets the accepted height variance to about 2.0-2.5mm, which is what we found to be the best setting for all. More than sufficient to pick up a double-charge, debris in the case or a case without powder.
This design change now allows all components to be PCB mounted on the custom board – making the electronics much more reliable and long lasting.

An additional improvement to the DAA Magnetic Powder Check 2.0 is that the polymer shoe on the end of the plunger rod (which contacts the powder) has now been replaced with a brass CNC machined part, which helps to reduce the static electricity which could cause some powder to be lifted out of the case. 

The DAA Magnetic Powder Check 2.0 assembles onto a station immediately after your powder dropper, screwing into a standard die thread 7/8-14 station. However, unlike other powder check systems, the DAA product does not require a dedicated hole drilled through the tool head next to the station! It can be used on ANY progressive reloader which has an available station after the powder drop.

A powder-check does require the use of a station in your toolhead, so if you do not currently have an available station, you may need to combine your seating and crimping into one station using a 2-in-1 seat/crimp die to free up a station. These too are available from DAA.

The DAA Magnetic Powder Check 2.0 is activated off the top rim of the case rather than the base of the shell plate, this means that no alarm will sound if no case is present. The powder sensing plunger (now with brass shoe) enters into the case mouth to rest on top of the charge and measure its height, sounding an alarm if the  powder level is either too low or too high. It provides both an audible beep alarm as well as a bright red LED light when triggered.

The DAA Magnetic Powder Check 2.0 includes a replacement short plunger, suitable for use with rifle ammo. When using for rifle, simply replace the plunger, and assemble the steel rod upside down, using the end without the brass shoe to enter into the small case mouth. Parts included make this suitable to use with all pistol ammo (9mm and up) and for rifle from .223 and larger.

It’s compact size, slick and modern design, ease of setup and adjustability, make the DAA Magnetic Powder Check 2.0 the perfect accessory for your toolhead!

Summary of features and advantages:

  • Can be used on all toolheads, does not require a dedicated hole near station.
  • Assembles onto any 7/8-14 station
  • Provides both an audible AND a visual alarms
  • Acceptance range of powder level is approx. 2.0-2.5mm. Easily enough to trigger an alarm in case of a double-charge or no-charge situation.
  • Includes all parts for both rifle and pistol use
  • Activates off the rim of the case, so no alarm sound when no brass is present
  • Slim and compact design
  • Quality materials. Stainless Steel Rod, Brass shoe, with an aluminum red anodized die body. Rubber coated glass-fiber reinforced nylon for electronic housing
  • Custom PCB board for all electronic parts ensures reliability and longevity

 

User Manual

Download - English

 

Reviews (117)

Friday 30 September, 2022
Can be very sensitive with certain powders. Constantly adjusting it. Hoping DAA will allow me to return it, as it didn't work for me.
DAA has a lot of great ideas, and I've purchased many of them over the years.
Tuesday 13 September, 2022
I originally purchased a Dillion powder check for my 9mm 1050 toolhead;

https://www.amazon.com/Dillon-Precision-Powder-Check-System/dp/B00XM3GBYG

I replaced it with the DAA Magnetic Powder Check and bought additional powder checks for my 45 ACP and 5.56 toolheads. The DAA Powder Check is a superior design because the height is adjusted based upon the height of the magnet. It is easier to install and doesn't get out of adjustment like the Dillon powder check.

Stop if you are going to get a powder check and you are considering the Dillon. I had to continue to check the powder level visually when using the Dillon to avoid squibs. Why bother getting a powder check if you still need to check the powder visually to eliminate squibs?
Wednesday 07 September, 2022
This powder checker is fabulous! I never really had confidence in the other powder checkers I had this one has the alarm, LED light signal and is super sensitive and easy to set. It is totally changed my reloading game!
Monday 29 August, 2022
Works great if Im using a specific brand of brass. Dial it in for Winchester brass, and it chugs right along with no problem. If you collect range brass as I do, you cant run hodge-podge brass through it. Differences in head space from brand to brand will set off the alarm.
Tuesday 21 June, 2022
Works great but I can’t use it because the two in one die did not work for me ?
Friday 10 June, 2022
This is much better than original unit. More accurate, and I have confidence in it. I taped on a visual indicator (paper arrow) so that if I hit a limit slightly, I can tell if it is high or low limit. Made initial adjustment and haven't had to reset yet.
Sunday 05 June, 2022
I have bought a lot of products from DA and have always 110% satisfied with everything. Their support system is beyond expectations and they have just about everything I want BUT a lot I can't afford.
Thursday 02 June, 2022
Very happy with this powder monitor. Works as advertised, easy to set up. Currently installed on my Hornady progressive, plan to purchase another for my Dillon.
Wednesday 20 April, 2022
I would not recommend this product. I am using it in 45 ACP with a spherical powder (MP190) and it beeps at me about 4 out of every 5 rounds, no matter how many times I try to reset it. I was stopping production to weigh charges but they were always + or - 3 tenths of a grain of what I was going for.
Monday 21 March, 2022
Works great! Easy to install and set up and the visual indicator is very helpful
Saturday 26 February, 2022
Easy to set up , works great . Need to pick up a few more for my other tool heads .
Wednesday 09 February, 2022
Great, but gives false alerts every 20 or so rounds. I used to remove the case to check powder (always good), but now I just rotate the magnet a little and the alarm goes off. Have adjusted and readjusted, still can't get this to stop. Overall, very good tool.
Monday 07 February, 2022
Only four stars from me because I found one drawback in this otherwise perfect product. When checking 9mm pistol loads, the "piston" on the measuring rod causes an air "overpressure", forcing several granules of powder out of the case. And thus, creating a powder spill (and lowering the load consistency, even on hard to measure levels). When reloading some 1000 cases in one session, there was spilled powder all over the place because of this. Finally, I had to stop using it for this caliber.
Tuesday 01 February, 2022
Very nice and only alerts when a case is present. A cheap investment to avoid an incorrect charge.
Wednesday 29 December, 2021
I have several of these and they all work perfectly.
Tuesday 28 December, 2021
These are great when setup properly. I have one setup on all my tool heads for each caliber I reload.
Monday 27 December, 2021
This powder check works OK. Nice that it has both an audio and a visual warning. My experience was that it was more "finicky" to set up and adjust the alarm levels than the Dillon powder check. Perhaps it was me. I was using it on an XL650 for 9mm.
Sunday 12 December, 2021
Second one I purchased for my other Dillon Quick Change. Simple to install AND it has saved several no powder and 1 double load in my 147 9mm. $65 buck well spent!!!
Thursday 04 November, 2021
Exceeded my expectations. Pretty simple to set up, and with a little care and attention during set up and change over I'm able to get consistent results.

Audible and visual alarms provide dual sensory inputs, and for me, a valuable addition to my reloading process.
Wednesday 03 November, 2021
Once adjusted is very good. Difficult but not impossible to adjust. The problem is when the correct amount of powder is in the case, it is difficult to hold the stem still while getting magnet at just the right height and then tighten the allen key. Then run the press and it will beep when the next round has the correct charge, so have to adjust several times until finally right. Once adjusted it is awesome, really a great tool to have. I would suggest having clips to hold the stem at the correct height so you can easily set the magnet correctly the first time, maybe clips to hold the magnet too before tightening down.

Also Available In Set(s)

$218.70 $196.86
You may also be interested in