Thursday 14 November, 2019
Not a lot to say on these. I bought 3, one for 9mm, one for 45ACP and one for .223 Remington.
They work as intended and allowed me to setup the powder checker right next to the powder charger.
Thursday 17 October, 2019
I use this on my Super 1050 with AmmoBot and it works great. Easy to set up and my rounds chamber gauge great. I will be purchasing more of these in other calibers.
Sunday 06 October, 2019
The products that DAA offer fit my Dillon 1050 loader perfectly and perform great. I have not had any problems with any of the products from Double Alpha Academy and will be looking forward to more items in the future.
Charles T R***r
Thursday 04 July, 2019
Must Have if you're progressive loading with MisterBulletFeeder & PowderSense.. it frees up the station needed. I have the Mark7Autodrive with Dillon 650XL and there's no way you can run it without this Gizmo. Thanks for thinking of EVERYTHING DAA!!!! I am currently loading 38cal 158Grain RNFMJ 1000+ an hour minimum FLAWLESS Length. WhooHooooo what's next?
Saturday 11 May, 2019
Used in a Rockchucker. Easy to adjust. Maintained consistent OAL. Great for saving time on high quantity 223 reload. Extremely satisfied.
Wednesday 01 May, 2019
Works perfectly on Lock N Load AP. The lock ring is close to the top of the die, but still plenty of thread to lock in properly. I recently upgraded from a Lee Classic (Great press too) to a Hornady Lock N Load AP for the increased speed of loading compared to the turret.
I drank the Kool-Aid and bought the Hornady dies to go along with the new press. Long, frustrating story short, I returned all the Hornady dies and installed the old Lee dies. I needed a combination seat/crimp die instead of the separate Lee seat and crimp dies I had been using because I added a powder cop. The Hornady combination seat/crimp die was the worst of all the dies. I had two and they both did not work properly. Sent emails and a video to Hornady to show the problems with the seat/crimp die and their response was less than satisfactory.
This 2-in-1 die from Double Alpha works fantastic. Very little adjustment required after initial setting. I had to add a bit more crimp to get the cases to fit in my case gauge properly.
BUY THIS DIE! You won't be disappointed.
Tuesday 26 March, 2019
Got this to use on my XL660, seems to work ok but to get the die to where it works best the die is too short and you can’t use the locking ring. Would have gotten 5 stars if it adjusted correctly
Thursday 31 January, 2019
Quality product. As others, I wanted to use the XL650 powder check system and Mr bullet feeder so this was a great option.
Friday 09 November, 2018
The two and one die was easy to install and works like a champ. It is the solution that works well with the Dillon 6540XL when you use a powder check system. I definitely am glad I bought this for my system...
Monday 30 July, 2018
i am very happy with this die.i, to was sceptical about seating and crimping at the same station, but it worked satisfactly. i used this on a new lee breechblock pro press, and i was able to load at dillon rate for about half the price! i am using the bullet feeder you provide, with a powder drop tube that i modifyed to use with the lee autodrop measure. i would suggest that you consider an option of the lee style drop tube,rather than the dillon.many cost consious reloaders will want to use your products both for economy and especially reliability, as the lee bulletfeeding system is notoriously trouble-prone and your system works like a dream.
Tuesday 17 July, 2018
I bought the 2-in-1 to compliment the Mini Bullet-Feeder for my 550. Excellent results - very happy!
Monday 16 July, 2018
There is much negativity about seating and crimping in one station online that it had me very hesitant to try. I really think these people putting down havent actually ever tried it. It was super easy to set up and adjust correctly and it works perfectly. Plus I get the added benefit of keeping my powder checker. I would definitely recommend.
Monday 12 March, 2018
Exallent die I use it on my 650 so I can use powder check & Mr bullet feeder.
Makes it easy
Friday 05 January, 2018
I installed this die on my XL 650 so I could keep my powder check system while also using Mr. bullet feeder. It did not take too long to dial-in, I highly recommend this product.
Thursday 01 June, 2017
I utilized the die on a 650 Dillon press, so that I can utilized the powder check alarm with the Mr. Bullet accessory. It adjusted fairly easy, but not as consistent with the Dillon dies. I decided to go back to the Dillon die as the crimp was consistent. It did perform as advertised. Would I recommend this? Yes, if you plan on using a powder check alarm with Mr. Bullet on a Dillon 650 press.
William Hoshell I***I
Tuesday 28 February, 2017
Nice die. Used on Dillon 650. Takes some adjustment but works great once dialed in. Enables use of bullet feeder in station 4 while maintaining my powder check in station 3.
Thursday 18 August, 2016
If you own a 550, then you MUST HAVE this Mini Bullet Feeder and the DAA 2in1 die. So easy to install and its very easy to use
Tuesday 29 March, 2016
Very good and easy to use. I use it on my 550 to clear one space for a bullet feeder :-) It is a bit different then the dillon dies, but absolutely good quality and easy to use. I have consistent bullets and small adjustments in the OAL of the bullet is easy to do without altering the crimp.
Christian van der K***f
Friday 25 March, 2016
I use a 550 with a Mr. Bullet Feeder and I have found that this 2-in-1 die is the best solution to having to seat and crimp on one station. Best of all it's reasonably priced. Once it is set it doesn't change! If you're stuck with a 550 with caseloader and you want to eventually get the 1050 one day like I do, then consider a Mr. Bullet Feeder and this die and make the next logical step happen. You won't regret it. I shoot moly-coated bullets in 40 and have had zero issues.